Used Forging

2015 5/8" x 5" National HS LS-DSSD Warm Header

Additional information: Machine was fully rebuilt in 2015 Complete with: Power Driven Uncoiler with a Multi-Roll Pre-Straightener Ambrell EKOHeat 65/100 65kW Induction Heater new 2013 HYFRA (German) Cooling syste...

1980 440 ton 3-1/2" dia Peddinghaus Caddy 80 Bar

• Manufacturer: Peddinghaus

Additional info: Cutoff capacities at material tensile strengths: Rounds: psi 65,000 - 3.500" psi 92,000 - 3.156" psi 121,000 - 2.750" Squares: psi 65,000 - 3.937" psi 92,000 - 3.562" Flats: psi 65,000 - 7" x 1.3...

1980 1,200 ton National model 6-4 Heavy

• Manufacturer: National

Complete with: Spare parts as follows : (1) Main Electric Motor (2) Adjusting Wedges (1) Upper transfer finger assembly (1) Lower transfer finger assembly (1) Die Block clamping piston This National 6-4 was used ...

3,500mm Asian Built Radial Axial Ring Rolling Mill Re:24925

• Manufacturer: Asian Built

Dia: 3,500 mm | Height: 800 mm | Builder: Asian Built | Radial: 280 tonnes | Axial: 180 tonnes | Min dia: 650 mm | Number of main roll motors, current type & power of each: One DC @ 500kW | Number of axial roll ...

2,800mm Banning RWW H120/V100 CNC

• Manufacturer: Banning

Max Ring diameter - 2,800mm (110") Max Ring height - 500mm (19.7") Radial tonnage - 120 tons Axial tonnage - 100 tons Max Ring Blank weight is 2,000 kg Radial (King) Roll drive power - 315 kW (422 hp) Axial (Edgi...

6000mm dia Kaltek Ring Rolling Mill, 80~1100 Ring Height

Additional info: Replacement of PLC Control system, PLC Main panel & Operator's panel to brand new Siemens S7-400 Upgrade of Hydraulic system Replacement of packing and seals Replacement of bearings Current Volta...

1970 1,200 ton Hatebur AMP-70 4-Die, max bar dia

Still installed and under power for inspection Very Good working condition Available for immediate inspection and delivery

16,000 ton SMS Horiz Direct Sgl Action Ext Press, Ind Billet

Additional Data: Main cylinder: 13560 MT Side cylinder: 2440 MT Working pressure: 31 MPa Main cylinder dia.:2360 mm Side cylinder dia.: 360 mm x 4 pcs Return force: 10.8 MN (10800 MT) Extrusion stroke: 3700 mm Bi...

HYODONG 6Die - Eco Design

• Manufacturer: HYODONG

Equipped With Specifications: HLNP-618 Specifications: Features: HL Series Highlights: ** Innovative former design using knuckle press type structure & power transmission method. With no crank shaft, machine uses...

HYODONG 36mm

• Manufacturer: HYODONG

Equipped With Specifications: Features: MACHINE FEATURES/TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and p...

AJAX 1″ UPSETTER

• Manufacturer: Ajax

Equipped With Catalog Specifications: Forging tonnage: 200 t | Max bar diameter: 1" | Stroke per minute: 75 | Stroke of machine: 6” | Hold: 1-1/2" | Die opening: 2" | Stock gather: 3-3/2" | Motor: 10 HP | Floor s...

AJAX 1″ UPSETTER

• Manufacturer: Ajax

Equipped With Forging tonnage: 200 t | Stroke per minute: 90 | Stroke of machine: 6? | Grip opening: 2-1/4? | Gather: 3-3/4? | Hold: 2-1/2" | Die height: 9? | Die thickness: 5? | Motor: 7.5 HP | Floor space-width...

National #6

• Manufacturer: National

Equipped With * AIR CLUTCH * AIR BRAKE * CONTROLS MAXIMUM LENGTH OF ROLLED SECTION: 24"

AJAX #0

• Manufacturer: Ajax

Equipped With Diameter of roll: 12-1/2" | Standard width roll: 14" | Floor space, approx.: 5'8"L-R x 4'2"F-B | Weight, approx.: 8,500 lbs

NAZEL 4B 600LBS Blacksmith Power Forging Hammer Pneumatic Self-Contained

"Normal wear from use but that- OVER 30 years ago, and since then- always kept in dry storage. You MUST read the history of it below. Great condition with smooth ram cylinder surface. i.e. no scoring. It will nee...