Used Processing in Missouri, USA

LOT OF rubber matts, 2- 46 in x 35 in x 3/4 in thk, 5- 48 in x 69 in x approx 3/4 in thk

LOT OF rubber matts, 2- 46 in x 35 in x 3/4 in thk, 5- 48 in x 69 in x approx 3/4 in thk

ICM sand blaster booth, serial no 4800-3886-1, 2 hp, 208-220/440 vac, 48 in w x 45 in x 95 in oah

ICM sand blaster booth, serial no 4800-3886-1, 2 hp, 208-220/440 vac, 48 in w x 45 in x 95 in oah

LOT OF air regulator with drier, Central Pneumatic air filters, stock no 1118, pressure gauges,

LOT OF air regulator with drier, Central Pneumatic air filters, stock no 1118, pressure gauges, misc

Unknown Manufacturer: Used 11' x 36" Steel Belt Conveyor

• Manufacturer: Unknown Manufacturer: Used

This used 11' x 36" steel belt conveyor is ideal for recycling and trash management operations. It consists of a 36-inch wide steel belt, offering durability and reliability for handling a variety of materials. T...

1984 Cherry Burrell 36-144

• Manufacturer: Cherry Burrell

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Serial no. A4156. Scraped surface area 106 sq ft. Model 36-144. All contact surfaces are 304 stainless steel. Has 2 se...

2023 Econoline 101701G-A 60"x48" Abrasive Blast Cabinet

• Manufacturer: Econoline

Air Regulator & Gauge Safety Switch Dust Collector Foot Pedal Nozzle Safety Gloves

Peerless 36 inch Twin Shaft Pugmill Plant

• Manufacturer: Peerless

Peerless 36" Twin Shaft Portable Pugmill Plant Detroit Diesel Engine Bituminous Pump For Making Cold Mix Asphalt Water Pump To Do Pug Mix (Have To Swap Out) Mounted On Single Axle Dual Tire Carriage W/Eye Hitch F...

1984 Cherry Burrell 36-144

• Manufacturer: Cherry Burrell

Cherry Burrell Thin film evaporator 36-144. Turba Film Processor wiped film evaporator. Scraped surface area 106 sq ft. Model 36-144, S/N 35465EA, Mfg # A4154. All contact surfaces are 304 stainless steel. H...

10x11x22 Batch Oven - NEVER USED - STILL IN CRATES

• Manufacturer: Still

UNUSED CLASS A OVEN MANUFACTURED BY GLOBAL FINISHING INDUSTRIES IN 2021, NEVER INSTALLED. DOUBLE DOOR PASS THROUGH OVEN - TOP MOUNTED COMBUSTION CHAMBER WITH 2mBTU GAS BURNER AND 14,000 CFM/10 HP BELT DRIVEN RE-...

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) 162011

• Manufacturer: Shopbuilt

SHOPBUILT 24″ X 80′ TRUSS CONVEYOR (24″ DEEP TRUSS) Shopbuilt 24″x80′ truss conveyor (24″ deep truss) with 3x3x1/4 main cord & 2x2x1/4 lattice. 35 degree sealed idlers & 2 ply belt (good). Has gearbox, but no mot...

TAMROCK ZOOM TRACK HYDRAULIC DRILL 510118

• Manufacturer: Tamrock

Tamrock Zoom track model 600. Catt 3116 engine with approx 1000 hours. Unit has 8915 hours, drifter 7275 hours. Needs new seat and to be cleaned up. Drill runs and was working when parked.

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.