Used Threading & Tapping

930H Four Station Wheel Hub Drill, Ream and Tapping Machine With Gantry Transfer
This machines takes a large steel wheel hub directly from the incoming conveyor, rotates the part into the on-car position, gantry transfers the part to be drilled and reamed for the lug holes. It also adds in t...
Montpelier, OH
Auction
Cedarberg EZ Tapper
- Manufacturer: Cedarberg
Lot 39 Cedarberg EZ Tapper Hand Tapping Machine with Taps and Work Bench
Blaine, MN
Visit Auction Website
Trusted Seller
1-7/8"-8 x 14" Carbon Steel Fully Threaded Stud & 2 Grade 2H Hex Bolts-Lot of 10 Threaded Rods & Threaded Studs
- Manufacturer: Highland
Thread Size : 1-7/8"-8 Thread Class : 2A Min. Tensile Strength : 115,000 psi Material : Carbon Steel Threaded Rod Material Grade : Grade B7 Threaded Rod Finish : Black Oxide Dia./Thread Size : 1-7/8"-8 Rockwell H...
$600 USD
Chico, TX
Auction
Procunier 3
- Manufacturer: Procunier
Lot 144 Procunier Model 3 Tapping Head Main unit approx weight: 0.00 lbs | Main unit dimensions (in inches): Length: 0.00" Width: 0.00" Height: 0.00" | Dock door: 12' x 14' H Door Ground Level Doors | Loading d...
Plymouth, MN
Visit Auction Website
Trusted Seller
RIDGID "535" Pipe Threading Machine & Cart
- Manufacturer: Ridgid
- Model: 535
- Phase type: Single-phase
RIDGID "535" Pipe Threading Machine & Cart as pictured
Houston, TX
Trusted Seller
REED B111
- Manufacturer: Reed
- Model: B111
- Threading length: 47.625 millimeter
Equipped With Max. Threading Diameter (In-feed): Up to 2" Maximum Thread Length (In-feed): 1-7/8"
Vaughan, Canada
Trusted Seller
REED A23
- Manufacturer: Reed
- Model: A23
Equipped With Min. - Max. Threading Diameter (In-feed): 1/4" - 3-3/4" Min. - Max. Thread Diameter (Thru-feed): 1/4" - 1" Maximum Thread Length (In-feed): 2-3/8" Maximum Thread Length (Thru-feed): 11"
Vaughan, Canada
Trusted Seller
MACHINES & TECHNOLOGIES BBW
- Manufacturer: MACHINES & TECHNOLOGIES
Equipped With THREAD ROLLING MACHINE TYPE BBW ? The upper die ? which is the longer one of the two dies ? is mounted on a movable slide. ? The lower, fi xed die is clamped into the height-adjustable die pocket by...
Vaughan, Canada
Trusted Seller
2021 GOVAMA HK25
- Manufacturer: GOVAMA
Equipped With Min. Threading Diameter (In-feed): 3 0.118) Max. Threading Diameter (In-feed): 48mm (1.889”) Maximum Thread Length (In-feed): 170mm (6.692") * Heavy duty 3”dia spindles * 7” Rexroth PLC control scre...
Vaughan, Canada
Trusted Seller
2013 TESKER 230
- Manufacturer: TESKER
Equipped With Max. Threading Diameter Up To 2-1/2" * Spindle Speeds VARIABLE * Complete with Hydraulic Pump and Tank
Vaughan, Canada
Trusted Seller
VIDEX
- Manufacturer: Videx
Equipped With * Fully Automatic Specialty Bolt Machines >> Single / Double End? U-Bolts, Eye Bolts, Anchor Bolts, Threaded Studs, Chamfered Parts and more * High Speed Planetary Thread Rollers * High Speed Nail R...
Vaughan, Canada
Walker Turner 70-400
- Manufacturer: Walker Turner
15.5" x 18" Table, 70-400 RPM, 10" Throat, Jacobs Ball Bearing Super Chuck, Face Guard 208-220, 440 Volt, 3 Phase
Plymouth, MN
Delta Rockwell 70-6XU
- Manufacturer: Rockwell
Adjustable Height 22" x 18.5" T-Slot Work Table w Oil Gutters with 15.5" x 18" Work Surface, 6" Hand Quill Feed, 200 - 2,000 RPM Variable Speed Spindle, Jacobs Ball-Bearing 0-1/2" Drill Chuck, #3 MT, Machined Bas...
Plymouth, MN
Trusted Seller
2013 GOVAMA 3R-9
- Manufacturer: GOVAMA
Equipped With **Safety Features *All pinch points guarded with covers *All covers have coded magnet safety interlock switches *2 handed control for jog or automation process *System must be reset after e-stop act...
Vaughan, Canada
Trusted Seller
REED A22
- Manufacturer: Reed
- Model: A22
Equipped With Specifications for Diameter & Thread lengths are Infeed only
Vaughan, Canada
National 3-3 Threading & Tapping
- Manufacturer: National
- Model: 3-3
Good condition National 3-3 Threading & Tappings manufactured in 1980. Located in USA and other countries. Click request price for more information.
USA