Used Presses in Saxony, Germany

2003 hydraulic Workshop Press Zeppelin

• Manufacturer: Zeppelin
• Stroke length: 400 mm
• Power requirement: 4.8 kW

HYDRAULIC DOUBLE COLUMN PRESS Special construction welded from 25 mm sheet steel Operating mode: single stroke Punch holder: pin M 70 x 2.5mm and punch Ø 128 x 440mm Table protection housing Round punch Ø 130 x 1...

Single Column Press - Hydraulic EIGENBAU

• Manufacturer: Eigenbau
• Daylight: 350 mm

Punch holder with M24x60mm internal thread Hydraulic power unit Röhm-Gamet, type 1E1 HS299, pressure 38bar, tank capacity approx. 50 liters One-hand operation

Screw press #B16015

Manual spindle press, balancer used dimensions approx. 1600 x 600 x 2050 mm Subject to changes and errors in technical data, specifications and prices as well as prior sale.

screw press

• Manufacturer: Unknown

Press force 100 Pressing force [kn]: 100 | Table size [mm]: 600 x 100 | Installation height [mm]: 200

screw press

Pressing force [kN]: 100 Table size [mm]: 600 x 100 Installation height [mm]: 200

Hydraulic press Neff 4 S20Z

• Manufacturer: Neff

Pressing force [kN]: 40 Table size [mm]: 320 x 220 Installation height [mm]: 200 mm

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic press, C-frame WMW Zeulenroda PYE 100SS

• Manufacturer: Zeulenroda
• Model: PYE 100

Hydraulic press, C-frame WMW Zeulenroda (grid) PYE 63S / 1M

• Manufacturer: Zeulenroda
• Model: PYE 63

Brass screw press 2.2 kW #B17352

• Manufacturer: IMC

Screw press dewatering press sludge press screw separator used with 2 counter-rotating parallel screws screw diameter approx. 150 mm Screw and sieves made of brass, rest steel Feed hopper approx. 400 x 500 mm Dri...

Workshop press 100 t 100t M/H-M/C-2

Condition: New machine Pressing force [kN]: 980 Table size [mm]: 1500 Stroke of the bear [mm]: 380

2001 Staufermatic Type 112

• Manufacturer: Staufermatic

Serial No.: M-1971 Control Siemens Simatic OP17

1970 WMW k.A.

• Manufacturer: WMW

5 pcs abor presses No. 2: throat 105 mm; distance ram-table 95 mm; ram stroke 36 mm; table L:120 x w:140 mm; weight 17 kg; dimesnions L:270 x W:220 x H:420 mm No. 3: throat 90 mm; distance ram-table 190 mm; ram s...

1965 Pellesier HHP 160

• Manufacturer: Pellesier

free loaded on truck pressure 160 t stroke 400 mm table-size 1150 x 350 mm diameter of piston 300 / 185 mm throat 225 mm speed of pressing 16....6 mm/sec pre-running speed 75 mm/sec return speed 208 mm/sec total ...

1980 BERG & SCHMID DP

• Manufacturer: Berg & Schmid
• Stroke length: 45 mm

The height of the plunger can be adjusted by loosening the Allen screws to 140 mm using the hand crank. Plunger holder Ø 10mm with return spring Base with 2x clamping hole Ø 12mm