Used Machine Tools in Saxony, Germany

Röhm KFG-300/3 (Nr. 36)

• Manufacturer: Röhm

EMAG Nr. 20012826 X0501 Merkmale: automatisches spannen Flanschaufnahme Ø 140 x 13mm Durchgangsbohrung 48mm Spannbolzen 3x M16x170mm Pmax: 60bar

WMW AP 510x270x65

• Manufacturer: WMW

very good steel plate for sale free, packed in oiled paper and foil Surface ground Ra 0.8 according to drawing T-slots according to DIN 650: a=36; h=65; b=60 c=26mm, chamfered approx. 1.5mm Distance from edge: 10...

1985 WMW 350

• Manufacturer: WMW

face slide with 4 internal/outer clamping chucks (clamping travel 80mm) clamping area internal: dia 110-350mm and external dia. 40 -300mm flange intake dia. 130mm

Röhm SSH 200/3 (Nr. 44)

• Manufacturer: Röhm

stationary vice SSH 200 Power chuck, hydraulic Features: Chuck flange Ø 280 x 17mm with clamping groove 4x / 18x30mm base flange Ø 290x30mm flange mounting Ø 140x10mm 20 set of different jaws

WMW PS 800

• Manufacturer: WMW

This face plate has no clamping claws. It is clamped using the associated Ø 790 x 26 mm clamping disk. The clamping grooves are 300 mm long and arranged in a radial pattern. T-slots according to DIN 650: a=22mm; ...

WMW ALU 4200x2000

• Manufacturer: WMW

Aluminum plate with 800 clamping holes, M8; countersunk Ø 11,5 x 15mm with 4 clamping holes, M24 The plate is placed on a wooden support frame.

WMW ALU 4000x1700

• Manufacturer: WMW

Cast aluminum plate, finished This plate can be used for assembly work on both sides. Numerous clamping holes (M8) evenly arranged on the plate. By means of lift/chassis (welded/screwed) the aluminum plate stands...

WMW Niles 250x4

• Manufacturer: Niles

4 jaw chuck with flange - width of the main body 80mm - with clamping jaws for internal /external - flange size Ø 250 x 18 mm, thread 4 x M16 ; pitch circle of the bolts = Ø 170 mm Other 3- and 4-jaw chucks and f...

Röhm KFD-F-EC 400/3 (Nr.35)

• Manufacturer: Röhm

Merkmale: automatisches spannen Kraftspannfutter Flanschaufnahme Ø 298 x 32mm Fmax: 110 kN Fges. 250 kN 6 Formbacken

WMW 600x3

• Manufacturer: WMW

3-jaw chuck with internal jaws flange Ø 730 x 10mm (pitch circle bore Ø 680mm) 1 set of external jaws 1x chuck key

STOLLE AP 5500x2150x340

• Manufacturer: STOLLE

Material cast steel Milled, finished surface T-slots according to DIN 650: a=28; h=46; b=48; c=21mm Center distance 150 / 230 mm

bolster plate AP 5500x1890x380

3 clamping plates (price per plate) Weights: No. 1 = 8000kg; No. 2 = 9000kg; No.3 = 8500kg Material: Cast iron T-slots according to DIN 650 Slots lengthwise Number 6 Size a=36mm,h=64mm,b=60mm,c=25mm Center distan...

bolster plate AP 2000 x 1500 (Nr.1 - Nr.6)

There are 6 of these clamping plates for sale. (price per piece) Material cast steel/profile casting T-slots according to DIN 650: a=43; h=105; b=76; c=50 mm; center distance 375 mm 4x passage holes Ø 90 mm 10x f...

PST 1,3

• Manufacturer: PST

3 chip containers (blue) type PST; capacity = 0.6 m³ Tipping angle approx. 45° for emptying Base frame size 1000mm x 1000mm x 180mm Sheet metal construction 8 mm thick 4 eyebolts for crane lifting

VIRAX thread cutting stock

Pipe threading stock, Threading stock VIRAX Type 62 in a plastic case, one hinge is broken used, tested!