Used Machine Tools in Saxony, Germany

GESAU drill

• Manufacturer: Pagus

Stepped drill with internal cooling GETTING (Ø14,5x23,5 /120 ° x25x110) with internal cooling! unused!

PAGUS drill

• Manufacturer: Pagus

Twist drill RECA HSS Twist drills 29.75 - 50 mm MK Shank 29.75 /32/35/37/38/39 /39.75 /42/44/44/46/50mm 14 pieces Used!

FIXATOR leveling range

• Manufacturer: Pagus

Bench leveling range for machine feet e FIXATOR 7 pieces Ø 100 mm x 1 mm, with slot 24 mm 8 pieces Ø 100 mm x 2 mm, with 24 mm slot 1 piece Ø 100 mm x 4 mm, with 24 mm slot 1 piece Ø 100 mm x 5 mm, with 24 mm slo...

IND-SPHINX® micro drill

• Manufacturer: Pagus

Micro drills, drills, 45 pieces IND-SPHINX® PRECISION LIMITED D5463 D5463008000850000 Ã0.80x8.50mm Other quantities on request! New!

WMW SP 5040x2230x460

• Manufacturer: WMW

Machine table can be used as clamping plate. - material - cast steel - clamping surface 4100 x 2230mm - outlet part lateral (at the side) = W: 2110 x L: 1040mm T-slots according to DIN 650 - b=54.0; c=21.0; h=55....

bolster plate AP 2500x1250x100 (Nr.1-2)

Cast steel The plates are machined before the T-slot with 75mmx60mm(recessed) Table surface 2530mm X 1245 mm Longitudinal slot: Number: 5 Size:a=32, h=53, b=54, c=23mm Center distance 250mm 2 slots Chamfered 8 th...

BILZ leveling shoe

Leveling shoe, machine base, wedge base, free-standing, 4 pieces BILZ PK 4/1 used, tested!

BILZ leveling shoe

Levelling shoe, machine foot, wedge foot, free-standing, 2 pieces BILZ 4-VRC New !

COVER tensioning drive

• Manufacturer: Pagus

Clamping drive, manual with fine adjustment DECKEL spare part for milling machine DECKEL KF12 ! used, tested !

COVER Trapezoidal threaded spindle

• Manufacturer: Pagus

Trapezoidal threaded spindle COVER Thread: Ø 24 mm spare part for milling machine DECKEL KF12 ! used, tested !

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chuck, three-jaw chuck WMW DH 250 x 3 ( DH250x3 ) TGL 30-2333 used, tested!

WMW 3-jaw chuck

• Manufacturer: WMW

3-jaw chucks, three-jaw chucks, power chucks, wedge hook chucks WMW ( DKRDA250x3 ) Jaws individually adjustable by toothing ! with accessories ! used, tested !

Tool milling machine TOS FN 20

• Manufacturer: TOS

Table size [mm]: 600 x 240 Tool holder: SK 40 Speed range [1/min]: 50 - 2500 Travel [X / Y / Z mm]: 300 / 200 / 350 Equipment / accessories: Vertical head with quill, counter bearing

RSF ELECTRONIC length measuring system

length measuring system RSF ELECTRONICS MSA6706 83577408 approx. 0.6 m connecting cable Spare part, etc. for Machining Center MAZAK AJV25 /405 ! Used!

Stimin FUS 32 tool milling machine

Table size [mm]: 950 x 450 Tool holder: SK 40 Speed range [1/min]: 25 - 2000 Equipment / accessories: Digital display Sony in 3 axes, milling head can be swiveled down with manual quill, counter bearing, coolant ...