
Agilent/Keysight W281D
- Manufacturer: Agilent - Keysight
- Model: W281D
The Keysight W281D is a 1-mm male to W-band waveguide adapter with a frequency range of 75 to 110 GHz. Use W281D with the Keysight 8510XF systems. Features:
Farmingdale, NJ
Agilent/Keysight W281DS
- Manufacturer: Agilent - Keysight
The Keysight W281DS In-line 1.0 mm (m) - to- WR-10 waveguide adapter offers a simple way of measuring waveguide devices in the W-band, 75 GHz to 110 GHz. Key Features: 75 GHz to 110 GHz
Farmingdale, NJ
Agilent/Keysight W281CS
- Manufacturer: Agilent - Keysight
The Keysight W281CS in-line waveguide adapter, 1.0 mm (f) to WR-10, offers a simple way of measuring waveguide devices in the W-band, 75 to 110 GHz. Key Features: 75 to 110 GHz
Farmingdale, NJ
Agilent/Keysight Y1901B
- Manufacturer: Agilent - Keysight
The Keysight Y1901B precision 1.0 mm-coax-to-1.85mm-coax adapter offers a simple way of measuring coaxial devices at higher frequencies. It is designed for the measurement of components with 50 ohms and frequency...
Farmingdale, NJ
Agilent/Keysight Y1243A
- Manufacturer: Agilent - Keysight
The cable kit is for use with the Keysight M9381A PXIe vector signal generator and M9391A PXIe vector signal analyzer for multichannel phase-coherent configurations. It includes cables to distribute four local os...
Farmingdale, NJ
Agilent/Keysight 779D
- Manufacturer: Agilent - Keysight
- Model: 779D
The Agilent 779D is an economical directional coupler designed for swept measurements in the 1.7 to 12.4 GHz range. Its high directivity and mean coupling accuracy of plus or minus 0.5 dB make the Agilent 779D id...
Farmingdale, NJ
Agilent/Keysight 84941A
- Manufacturer: Agilent - Keysight
- Model: 84941A
The Keysight 84941A Distribution Board is designed to simplify connections between the Keysight 87130A or the 70611A (Option 001) attenuator and switch driver and the devices to be driven. The 84941A consist of o...
Farmingdale, NJ
Agilent/Keysight 85043A
- Manufacturer: Agilent - Keysight
The HP 85043A system rack stands 123.7 cm (48.7") high, 60 cm (23.6") wide, and 80 cm (31.5") deep. Complete with support rails and ac power distribution (suitable for 50 to 60 Hz, and 110-240 Vac), it includes r...
Farmingdale, NJ
Agilent/Keysight 86210A
- Manufacturer: Agilent - Keysight
The 86210A has + 13 dBm maxmum calibrated output power levelled to ±0.25 dB. Accuracy is ±7 MHz in CW mode and ±10 MHz in all sweep modes. A special frequency adjustment control lets you maintain frequency calibr...
Farmingdale, NJ
Agilent/Keysight G870A
- Manufacturer: Agilent - Keysight
The HP Model 870A tuner is a waveguide slotted section with an adjustable probe mounted on a precision carriage. The position and penetration of the probe is adjusted to set up a reflection which effectively canc...
Farmingdale, NJ
Agilent/Keysight X424A
- Manufacturer: Agilent - Keysight
- Model: X424A
The Model 424A Crystal Detectors are designed for use in waveguide systems in the measurement of relative microwave power upwards to 100 mW in the range from 2.6 to 18.0 Gc. Output polarity of the detected signal...
Farmingdale, NJ
Agilent/Keysight X382A
- Manufacturer: Agilent - Keysight
- Model: X382A
The attenuation value of this direct-reading, precision attenuator depends on the rotation angle of the resistive card, rather than on the resistivity value of the attenuating material. Therefore, it is insensiti...
Farmingdale, NJ
IFR/Marconi 54421-003
- Manufacturer: Marconi
Cal: Calibration Available | As-is: Unit Sold AS-IS | J: 54421-003J
Farmingdale, NJ
Agilent/Keysight Z4462A
- Manufacturer: Agilent - Keysight
Keysight Z4462A Fast Ethernet LAN Probe As-is: Unit Sold AS-IS | Cal: Calibration Available
Farmingdale, NJ
Agilent/Keysight 21364A
- Manufacturer: Agilent - Keysight
The Philips 21364A Transesophageal (TEE) transducer has a frequency range of 3.7 MHz. - 5.0 MHz. and supports the following applications: Transesophageal. The Philips T5012 (21364A) transducer is compatible with:...
Farmingdale, NJ

