Used Electrical Test Instruments in Dublin, Ireland

Haefely PCD120

• Manufacturer: Haefely

Details The Haefely PCD120 is a compact coupling/decoupling network designed for EFT/Burst testing. Engineered according to IEC/EN 61000-4-4 standards, it ensures precise disturbance injection while protecting au...

Haefely ECOUPLER 4

• Manufacturer: Haefely

Details The Haefely Ecoupler-4 is a coupling/decoupling network engineered for surge and EFT/Burst testing. It ensures precise disturbance injection into equipment under test while safeguarding auxiliary devices....

Haefely ECOMPACT 4

• Manufacturer: Haefely

Details The Haefely Ecompact-4 is a compact EMC immunity test generator optimized for surge and EFT/Burst testing. It complies with IEC/EN 61000-4-4 and 61000-4-5 standards, ensuring accurate pre-compliance and c...

Marconi IFR Aeroflex 500A

• Manufacturer: Aeroflex

Details The Marconi IFR Aeroflex 500A Communications Service Monitor integrates FM and AM signal generators with a sensitive 2 mV receiver, enabling AM, FM, and SSB testing. It includes a 0.2 ppm TCXO for precisi...

Teseq LE4070

• Manufacturer: Teseq - Schaffner

Details The Teseq LE4070 RF Cable Set For NSG 4070 is designed for seamless compatibility with the NSG 4070 system, delivering reliable RF signal transmission with minimal loss. Built from high-quality materials,...

Solar 7399-3

Details The Solar 7399-3 Transient Generator delivers precise surge and transient waveforms for EMC compliance testing. Engineered to evaluate electronic equipment immunity against voltage spikes, it ensures cons...

Teseq (Schaffner) NSG 5500

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG-5500 is a modular pulse generator engineered for advanced automotive EMC testing. It supports a wide range of transient simulations including load dump pulses, with programmable am...

Schaffner NSG 223A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG 223A module is designed to generate high-energy pulses typical of those caused by switching inductive and capacitive loads or lightning strikes. It delivers pulses up to 2 Joules, availa...

Teseq (Schaffner) NSG437

• Manufacturer: Teseq - Schaffner

Details The Teseq Schaffner NSG437 ESD simulator delivers precise air and contact discharge testing up to 30 kV, ensuring compliance with IEC/EN 61000-4-2, ISO 10605, and other standards. Featuring a touch panel ...

Schaffner NSG222A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG222A Pulse Interference Simulator delivers precision testing with 5ns/100ns pulse forms, featuring a built-in coupling network for symmetrical and asymmetrical pulse injection on mains co...

Haefely PIM120

• Manufacturer: Haefely

Details The Haefely PIM120 is a precision impulse current generator designed for component and material testing. It delivers controlled, high-current pulses that ensure durability verification and compliance with...

Schaffner NSG 224A

• Manufacturer: Teseq - Schaffner

Details The Schaffner NSG-224A is a modular disturbance simulator mainframe engineered for the NSG-200 series, delivering core functionality such as power handling, line filtering, overload protection, and phase ...

Associated Research 5560DT (HypotPLUS II)

• Manufacturer: Associated Research

Details 5kV AC and 6kV DC Hypot Tester. 0mA AC - 20mA AC, 0mA DC - 6mA DC. Input: 115V AC 47Hz-63Hz single phase 230V AC user selectable. Output: 0kV AC-5kV AC (6kV DC) 10V/step Adjustment: 0mA AC - 20mA AC & 6mA...

Associated Research 4450DT

• Manufacturer: Associated Research

Details Output Range: 0 to 4000 VAC, 0 to 5000 VDC Leakage Current Range .75 mA to 15 mA in AC, .75 mA to 5 mA in DC. Accuracy: 2% full scale with 2% Tracking We use cookies to personalise content, ads and to ana...

Schloder SESD230

Details The Schloder SESD230 ESD Simulator delivers up to 30kV in both air and contact discharge modes, complying with IEC 61000-4-2 standards (150 pF / 330 Ohm network). It supports single or repeated pulse mode...