Used Sheet Metal Processing

Iowa Precision Corner Machine

• Manufacturer: Iowa Precision

Good Condition Model # CM-C-DHA Power Adjust from 4′ to 6′ Currently Set Up for PPC Serial # CM-0204

Iowa Precision Full Duct Line

• Manufacturer: Iowa Precision

Late 80s – early 90s (sections added at different times) Left Hand “U” Line Direction Four (4) Powered Underfed 60” 12,000 Capacity Un-Coilers Feed, Level, Bead, Pneumatic Powered Notching and Shear section – 60”...

Duro Dyne Roto Bonder

• Manufacturer: Duro Dyne

Model Used Duro Dyne Roto Bonder Voltage N/A Serial Number N/A Condition Used Comments N/A Sale Price Please for information or for similar products.

Betech Ovalizer

• Manufacturer: betech

Introducing the newest addition to your duct shop – the Betech Ovalizer. The Ovalizer turns your round, spiral ducts into flat-oval ducts, with numerous advantages over rectangular ducts: Allows for better air fl...

Iowa Precision Whisper-Loc Model FAH-456

• Manufacturer: Iowa Precision

Product Description Used for closing longitudinal seems on rectangular duct Adjustable for 3′, 4′, 5′, 6′ wide rectangular duct Self-Contained Hydraulic Unit 18 – 26 Gauge Capacity 1.5 HP Motor Dimensions: 96”x36...

Betech Spiral Machine SF10014

• Manufacturer: Betech

Product Description Used Betech Spiral Machine SF10014 Includes Forming Heads 4,5,7,9,10,12,14,16,18,20,22,24,26,28,30,32,34,36,38,40,42,44,46,48″ hoops Includes Uncoilers and Run Out Table 10′ Year New 2002 Opti...

Betech Ovalizer

• Manufacturer: Betech

Product Description Introducing the newest addition to your duct shop – the Betech Ovalizer. The Ovalizer turns your round, spiral ducts into flat-oval ducts, with numerous advantages over rectangular ducts: Allo...

1998 – 5’ Iowa Fabriduct Line

• Manufacturer: Iowa Precision

Product Description 1998 5’ IOWA FABRIDUCT LINE (under power, can be demonstrated) 6 – 10,000 LB UN-Coilers Center and End Tie Rod Hole Punching Mark-5 (Pitts & Snap Lock) Cold Sealant Cleat Roller PPC Weld Pin W...

PROFAB TD-Matic Corner Machine

• Manufacturer: Production Products, Inc.

Product Description Automatically inserts and crimps PPC/F Stackable corners Features OFFSET ANGLE MAGAZINE, allows for many types of transitions/ fittings PRESS HEAD AND CRIMPS CORNERS ALL IN ONE STROKE (less ai...

PROFAB Pittsburgh Seam Closer

• Manufacturer: Production Products, Inc.

Product Description PPI PROFAB Pittsburgh Seam Closer Machine -Smoothly and quietly closes the Pittsburgh lock seam on straight duct -Hydraulic Powered 5HP -Adjustable for 4′, 5′ -18 ga. Capacity

Pin-Fed 5″ x 2 15/16″ Labels

Product Description ATTENTION: We are discontinuing Pin-fed labels. Call for quantity and colors. Call for 10 boxes of Pin-Fed Labels or more $2 off per box. ATTENTION: We are discontinuing Pin-fed labels. Please...

Grip-Tite Cleat

Product Description Grip-Tite tabs prevent slipping by locking the cleat into the flange Used for both C and F profiles Made from 20 gauge galvanized steel Works well with PPI standard and Magnum Installation too...

EZ-End Reinforced Angled Duct Adapter

• Manufacturer: PROFAB

EZ-End is a duct-stiffening adapter designed for transitional duct. It conforms to any angle from 0 – 90 degrees. EZ-End works with both 1/2″ and 3/4″ EMT. Attaches to Condu-Lock. There’s no need for two sizes! E...

2014 Iowa Precision Pro Ductomatic

• Manufacturer: Iowa Precision

4 Decoilers Leveler Beader Notcher (“S” and Drive Cleat) Cleat roller Bend and Shear (including Male Pittsburgh or Snaplock)

Flagler Pittsburgh Machine 22 Gauge

• Manufacturer: Flagler

Used Flagler 22 Gauge Pittsburgh Machine 22 Gauge Capacity Portable, with drive cleat rolls 110 Volt, Single Phase with Cord RUNS PERFECTLY!