Used abb robot controllers

CNC arching machine | CNC sheet bending machine

1. Roofing without opening the edges connecting the two panels when viewed from bottom up, top down. 2. The machine is machined and assembled correctly to ensure parallelism between the shafts and the cutter to e...

Purlin Roll Forming Machine - Automatic - CZ300 - 3 punching stations

1. Width and height can be adjusted easily and controlled fully automatically by computer system. 2. All you need is just enter the size and press the control button and then the machine will automatically adjust...

Purlin Roll Forming Machine - C200 - 1 punching station | 2 punching stations | 3 punching stations

1. Run any edge size, edge required by the customer upto C200 2. Automatic double hole punching, single hole at any position on the purlin, the center of the holes can be changed at will 3. No need to change cutt...

Light Roll Forming Machine - C75 | C100

1. Roofing without opening the edges connecting the two panels when viewed from bottom up, top down. 2. The machine is machined and assembled correctly to ensure parallelism between the shafts and the cutter to e...

1-story laminating machine - Roof lining fake tile | Roofing tiles

• Manufacturer: SAIGON INDUSTRIAL METALLIC

1. The machine has a large rolling speed, large production efficiency, so users can save more time and still get the desired results. 2. The machine offers high productivity, more products can be produced in less...

Bending machine - With adjustment - 6.1M - H623

1. The bending machine is equipped with 3 hydraulic rollers, providing high accuracy in the bending process. The angle after bending is achieved accurately and evenly on all 3 points of the beginning, the end and...

Bending machine - With adjustment - 6.1M - H613

1. Equipped with 2 side degree adjustment 2. The angle of seismicity on both sides is always equal 3. The "BASIC" version must be adjusted manually, can be adjusted automatically (installation of motor, electrica...

Bending machine - With adjustment - 6.1M - H612

1. Equipped with 2 side degree adjustment 2. The angle of seismicity on both sides is always equal 3. The "BASIC" version must be adjusted manually, can be adjusted automatically (installation of motor, electrica...

Purlin Roll Forming Machine - C300 - 1 Punching Station | 2 punching stations | 3 punching stations

1. Run any edge size, edge required by the customer from C30 x 55 to 150 x 350 2. Automatic double hole punching, single hole at any position on the purlin, the center of the holes can be changed at will 3. No ne...

Deck Floor Roll Forming Machine | Floor Filling Machine - H76

1. Fast construction and installation progress due to the absence of formwork and scaffolding 2. Cost saving and cost reduction in construction 3. Long durability, anti-cracking on concrete surface 4. Superior wa...

Purlin Roll Forming Machine - Z300 - 1 Punching Station | 2 punching stations | 3 punching stations

1. An outstanding feature of Z purlins that C purlins do not have is the ability to overlap each other (Considered as continuous beams), so Z purlins have better load capacity than C purlins. 2. Z purlins are wid...

Single-stage roll forming machine - Wave circle

Saigon Industrial Mechanical Co., Ltd | Saigon Machine - SGM specializes in the construction of all kinds of corrugated iron forming machines, with a variety of models, precise profiles according to customer requ...

Deck Deck Roll Forming Machine | Floor dumping machine - H45 | H50 | H71

1. Fast construction and installation progress due to the absence of formwork and scaffolding 2. Cost saving and cost reduction in construction 3. Long durability, anti-cracking on concrete surface 4. Superior wa...