Used Bending & Forming in Bavaria, Germany

Trusted Seller
ZOPF T 200 Multiprogramm
- Manufacturer: Zopf
- Model: T 200 MULTIPROGRAMM
- Power requirement: 2.2 kW
Domestic equipments: - with semi-automatic control (99 programs with 16 steps each) - including bending bolt (without punch) - Tool holder for dies - Foot pedal Equipment: - Stamp, small U = 145 mm 85 °, H = 200 ...
Günzburg, Germany
Trusted Seller
ZOPF T 300 Multiprogramm
- Manufacturer: Zopf
- Model: T 300 MULTIPROGRAMM
- Power requirement: 3 kW
Domestic equipments: - semi-automatic NC control (99 programs with 16 steps each) - incl. bending bolt (without punch) - Incl. tool holder for dies - incl. foot pedal Equipment: - Stamp, smallest U = 145 mm 85 ° ...
Günzburg, Germany
Trusted Seller
ZOPF T 400 digital
- Manufacturer: Zopf
- Power requirement: 4 kW
Control: NC - | Storage location: Factory | Freight basis: Delivery ex works. | Press capacity: 400/40kN | Stroke length: 285mm | Working feed: 10mm/sec | Return speed: 20mm/sec | Table dimensions: 660x1250mm | ...
Günzburg, Germany
Trusted Seller
ZOPF T 100 digital
- Manufacturer: Zopf
- Model: T 100 DIGITAL
- Power requirement: 1.5 kW
Control: Other - | Storage location: Factory | Freight basis: Delivery ex works. | Pressure: 100kN | Stroke: 0-200mm | Table-size: 450 x 1000mm | Working speed: 6-10mm/ sec. | Return speed: 20mm/sec | Work heigh...
Günzburg, Germany
2000 long bending machine Jorns ML200-SO-CNC400A-4
- Manufacturer: Jorns
Used Jorns hydraulic swing bending machine, with material thickness adjustment, hydraulics on the left side of the machine, without roller shear, bending beam with removable extension rail approx. 8mm, 3 stop fi...
Hohenbrunn, Germany
Trusted Seller
ROLLMAK SM 90-10/3.3
- Manufacturer: ROLLMAK
- Power requirement: 1.1 kW
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 1050mm | Plate thickness: 3,3mm | Pre-bending: 3 | 0: 90mm | Minute slide.: 130mm | Total power...
Günzburg, Germany
2002 Long bending machine Thalmann Pico 150-6.2
- Manufacturer: Thalmann
- Power requirement: 3 kW
Used Thalmann press brake, motorized shear, 5 stop fingers, laser safety device. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be perfor...
Hohenbrunn, Germany
Trusted Seller
ROLLMAK SM 90-12/3.0
- Manufacturer: ROLLMAK
- Power requirement: 1.1 kW
Control: conventional - | Storage location: Factory | Freight basis: Delivery ex works. | Sheet width: 1256mm | Plate thickness: 3mm | Pre-bending: 2,5mm | 0: 90mm | Minute slide.: 130mm | Total power requiremen...
Günzburg, Germany
Trusted Seller
2007 KNUTH KRM-A 10/3.0
- Manufacturer: Knuth Werkzeugmaschinen
- Model: KRM-A
- Power requirement: 1.1 kW
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Sheet width: 1050mm | Plate thickness: 3mm | Total power requirement: 1,1kW | Weight of the machine approx.:...
Günzburg, Germany
Trusted Seller
ZOPF P38 Evo
- Manufacturer: Zopf
Control: conventional - | Storage location: Günzburg | Freight basis: Delivery ex warehouse Günzburg | Engine: 2,8KW | Weight of the machine approx.: 320kg | Dimensions of the machine approx.: 86 x 90 x 85cm
Günzburg, Germany
1991 Jorns SuperLine-300-SO-CNC-6 long bending machine
- Manufacturer: Jorns
Well-maintained and robust hydraulic bending machine with foot pedal, retractable sheet supports, hydraulic radius adjustment, and automatic sheet thickness adjustment programmable via CNC control, with detachabl...
Hohenbrunn, Germany
1992 Ozamech KM 3000-2.5 swivel bending machine
- Manufacturer: Ozamech
Used Ozamech folding machine, easy program angle setting on the side stand, with foot switch, removable extension rail, upper jaw rail approx. 30 degrees Machine is unrepaired, in its current condition
Hohenbrunn, Germany
2003 Long bending machine Jorns NL125-SM-OP 2100/2-4
- Manufacturer: Jorns
Used hydraulic Jorns press brake, with foot switch, emergency stop rail, retractable sheet metal supports, hydraulic roller shear up to 1.50 mm, control with 9 bending angles. The machine has been professionally...
Hohenbrunn, Germany
1992 Long bending machine Jorns NL125-SM-OP 6x1.25
- Manufacturer: Jorns
Used Jorns hydraulic press brake, foot switch, retractable sheet metal supports, emergency stop rail, motorized shear, water seal in the upper jaw, 9-channel control, control on the swivel arm, The machine wil...
Hohenbrunn, Germany
1998 Long bending machine Jorns NL100-SM CNC400 6x1.25
- Manufacturer: Jorns
Used Jorns press brake, foot pedal, program control without stop, emergency stop rail. The machine will be professionally repaired, inspected, and cleaned, and will then be fully functional. A test run will be ...
Hohenbrunn, Germany