Used Machine Tools in Bern, Switzerland

VOUMARD 3 CNC

• Manufacturer: Voumard

Control: NUM | Min. grinding diameter: 3 mm | Max. grinding diameter: 50 mm | Centre height: 200 mm | Longitudinal travel (z-axis): 300 mm | Cross travel (x-axis): 90 mm | Swivelling range: -5 / 60 ° | From: 550...

2011 PARAGON RIG-150NC

• Manufacturer: PARAGON

Control: HITECH | Min. grinding diameter: 6 mm | Max. grinding diameter: 150 mm | Max. grinding depth: 150 mm | Above the workpiece table: 520 mm | Longitudinal travel (z-axis): 540 mm | Rapid traverse z: 9 m/mi...

DISKUS DD 300 So

• Manufacturer: Diskus

Max. work-piece height: 80 mm | Number of grinding heads: 2 | Outside diameter: 300 mm | Inside diameter: 233 mm | Width / height: 50 mm | From: 1530 t/min | Up to: 24 m/s | Driving plate: 29.6 - 192 mm/s | Volt...

DISKUS DD 400 II CRM

• Manufacturer: Diskus

Max. work-piece height: 80 mm | Grinding width: 40 mm | Outside diameter: 400 mm | Inside diameter: 250 mm | Width / height: 50 mm | From: 135 t/min | Up to: 1435 t/min | Peripheral speed: 3 - 30 m/s | Rotation ...

TSCHUDIN TS 45 A

• Manufacturer: Tschudin

Control: SIEMENS SINUMERIK 840 D | Centre height: 100 mm | Distance between centres: 430 mm | Max. grinding diameter: 198 mm | Grinding length: 400 mm | Max. work piece diameter: 198 mm | Min. work-piece diamete...

2002 TSCHUDIN PL 105 A

• Manufacturer: Tschudin

Control: GE FANUC Series 18-T | Centre height: 175 mm | Distance between centres: 1000 mm | Max. grinding diameter: 348 mm | Grinding length: 1000 mm | Workpiece weight on centres max.: 250 kg | Diameter: 500 mm...

BLUM TC 50

• Manufacturer: Blum

DUNKES DG 05

• Manufacturer: Dunkes

Pressure: 1000 (12 Atü) kg | Length: 400 mm | Width: 150 mm | Max. distance from table to slide: 110 mm | Depth of throat: 65 mm | Machine's weight about: 20 kg | Height: 600 mm

BLUM TC 50

• Manufacturer: Blum

2000 JOSSI DLP 450 HV / 80E-ZH

• Manufacturer: JOSSI

Pressure: 5 kN | Length: 400 mm | Width: 250 mm | Depth of throat: 100 mm | Height: 730 mm

BLUM TC 50

• Manufacturer: Blum

MORSE TAPER ADAPTOR “EROGLU” ISO40 A CM1 L50 TF

for tools with MT shank and drawbar thread DIN 6364 –

FITTING TYPE UPA 3

ISO 50 for reaming head Weight: 3 kg

DRILL GRINDING MACHINE “CHRISTEN” TYPE 2-32

• Manufacturer: Christen
• Model: 2-32

Manufacturing origin Swiss Voltage 380/50/3 Netweight 255 kg Custom position 8460.3930 : GRINDING CAPACITY Right-and left-hand tools 2-32 mm Right-hand tools 32-52 mm Tools with taper shank Morse ...

REAMING HEAD “HAUSER” TYPE 5M

• Manufacturer: Hauser

Taper MT4 – division 0.2 mm