Used Battenfeld Extruders

60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000

• Manufacturer: Battenfeld
• Model: Gloucester

60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 Used 60" Battenfeld Gloucester Three-Roll Vertical Sheet Stack - Model 2000 This used 60" Battenfeld Gloucester three-roll vertical sheet sta...

BATTENFELD GLOUCESTER 54" Wide

• Manufacturer: Battenfeld

Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. Line consists of the following: (3) Acrison volumetric feeders with...

BATTENFELD GLOUCESTER 54

• Manufacturer: Battenfeld

Used 54" Wide Battenfeld Gloucester Co-Extrusion Sheet Extrusion Line, previously used for approximately 1200 lbs. per hour polypropylene sheet. 6" Batttenfeld Gloucester 30/1 L/D extruder driven by 500 hp AC mot...

BATTENFELD GLOUCESTER 108" FACE X 10" DIA.

• Manufacturer: Battenfeld

Used Battenfeld Gloucester pull roll assembly having (2) 108" face X 10" diameter rubber rolls. Rubber is driven by a 3 HP AC motor through a gear reducer. Includes inverter ABD operator controls. 480 volts, 3 ph...

56" Wide HPM/Battenfeld Gloucester Horizontal Sheet Line

• Manufacturer: Battenfeld
• Model: Gloucester

56" Wide Battenfeld Gloucester Horizontal Sheet Line Line Consists Of The Following Pieces: 3.5" HPM Extruder, 30:1 L/D, 11.67:1 Gearbox Ratio, Lufkin Gearbox, 125 HP DC Motor, 7 Barrel Zones, Water Cooled Barre...

1992 BATTENFELD V63 #ES0092

• Manufacturer: Battenfeld

Typology: Mono | Screw diameter mm: 60 | Degassing: No

120mm Battenfeld Single Screw Extruder

• Manufacturer: Battenfeld

250mm Battenfeld corrugated pipe line with 90mm Battenfeld 1-90-30B extruder, Corma 820-6M corrugator, Cooling tank, take off table.

• Manufacturer: Battenfeld

250mm Battenfeld corrugated pipe line with 90mm Battenfeld 1-90-30B extruder, Corma 820-6M corrugator, Cooling tank, take off table.

1600mm wide Kuhne Battenfeld PET sheet line with 105mm vented extruder, gear pump, 1300mm die, 1600mm Battenfeld stack, pumps, haul off 1200mm winder.

• Manufacturer: Battenfeld

1600mm wide Kuhne Battenfeld PET sheet line with 105mm vented extruder, gear pump, 1300mm die, 1600mm Battenfeld stack, pumps, haul off 1200mm winder. 105mm Kuhne single screw extruder model K105 - 33D. Fan coole...

1600mm Wide Battenfeld Gloenco Sheet Line 120mm Extruder, , 1400mm Die, Roll Stack, Haul Off Winder.

• Manufacturer: Battenfeld

1600mm Wide Battenfeld Gloenco Sheet Line 120mm Extruder, , 1400mm Die, Roll Stack, Haul Off Winder. 120mm Battenfeld single screw extruder with fan cooled barrel. Plugged vented 32D. Plasticolour volumetric do...

2006 Twin-Screw Extruder Battenfeld BBEX 2-90-25V

• Manufacturer: Battenfeld

Item Description: Lot consists of: (1) Twin-Screw Extruder Technical Details: screw dia 90mm, capacity max 300kg/h, BMCsmart operation panel, weight ca. 3to /// drive motor HENSCHEL T1MAX90 C-35L, SerNo 43-220/5,...

1998 Twin-Screw Extruder Battenfeld BEX - 2 - 65 - 18V DURUMAX

• Manufacturer: Battenfeld

Item Description: Lot consists of: (1) Twin-Screw Extruder Technical Details: screw dia 65mm, weight 2,8to /// drive: Thyssen Henschel TPM 3-65-DOS-25, SerNo 6333547/13, weight 710kg Further Information This webs...

250mm Battenfeld corrugated pipe line with 90mm Battenfeld 1-90-30B extruder, Corma 820-6M corrugator, Cooling tank, take off table.

• Manufacturer: Battenfeld

250mm Battenfeld corrugated pipe line with 90mm Battenfeld 1-90-30B extruder, Corma 820-6M corrugator, Cooling tank, take off table.