Used Processing in Opole, Poland

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Conveyor belt, conveyor belt TA 260

Horizontal length: 3.50 m, diagonal length: 2.50 m Belt width: 60 cm Discharge height: 180 cm

Transverse feeder 5-row ascending PP 227

Length ( transport road ) 4.80 m ( horizontal part 2.50 m , slant 2.30 m ) Width 4.00 m Distance between guides 150 x 90 x 90 x 60 cm Elevating feeder to a height of about 2,00 mm Motor 2 PS

Plate chain, transport

pitch 200 mm ( from pin axis to pin axis ) thickness of insert 10 mm width between inserts inner 45 mm width between inserts outer 65 mm height of plate 60 mm We have about 80 mb

Buffers, hot water tanks, capacity 18,000 l

Buffer with a capacity of 18,000 liters Height 458 cm Wall thickness 6 mm Diameter without insulation 2500 mm Diameter with insulation 2900 mm Two hot water buffers, sealed, freshly dismantled due to replacement ...

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Emergency cooler for 3.5 MW furnace

Total of 8 fans, under them high-efficiency coolers Two segments, one segment will cool 1500 KW

Atlas Copco GA 55 13 compressor

• Manufacturer: Atlas-Copco
• Model: GA 55

TYPE GA 55 Pressure 10 bar Engine 55 KW Year 2000

Conveyor belts , conveyor belts, driven TA 257, TA 258

Length 3.00 m Belt width 30 cm, belt with takers Total width 45 cm Height 35 cm

Conveyor belt, conveyor belt, driven TA 255

Length 5.50 m Tape width 30 cm, tape with takers Total width 50 cm Height 35/75 cm

Urbas 3.5 MW furnace

Biomass, bark, wood chips, and sawdust furnaces. Year 2002 Furnace rated at 3500 kW Floor-mounted heat exchanger rated at 5500 kW Delivery scheduled for late April – May 2026

Furnace for drying sawdust and wood chips

Cells

Cells (2 pcs.) Inlet 27 x 14 cm Engine 1.2/0.81 KW

Tank, expansion tank made of acid-resistant sheet metal

Height: 3 m Diameter: 2 m Total height: 4.20 m Tank as shown in the photos