Used Sanders in Minnesota, USA

Delta 12" Disc Sander

• Manufacturer: Delta

Catalog No. 31-125, S# 92K69201, Tilting table, 1hp 115v 1ph 15amp 60hz, More info coming soon

Crouch 52 Edge Sander

Model 52, S# 110786, 6"W Belt, Manual adjusted tension, Side support table 13"W x 52"L, End support table 30"W x 12"L, 5" Dia. exhaust vent, 5hp 208-230/460v 3ph, Overall Dim. 8'L x 40"W x 57"H (on 7.5"H pallet),...

Setco SPL Belt Sander

Model SPL, Type 33VMY, S# 62642, 38 Hrs., 2 Spindle speeds 1,210 & 3,030, Wheel size 30", 30hp 230/460v 3ph 60cyc 1,760 rpm, More info coming soon

Grinding Master 36" Sander

Type SCSB900, S# KM698-06, Variable speed in feed, Spindle brake, Powered up/down elevation on table, Extra wheels, 18kw 3,400 rpm 220/440v 3ph Wired 220v

Heller 3" x 79" Belt Sander

• Manufacturer: Heller

3" x 79" Belt, 6,500 ft./min, 4hp, Est. Wt. 165 lbs., More info coming soon

Porter Cable Wet/Dry Belt Sander

Model BG -8, S# 74550, 5hp 220/440v 3ph, Rated 8" belt width

Porter Cable Dry Belt Sander

9" Max belt width, Tilt table, 5hp 220/440v 3ph, Model G-8

Timesavers/KLK Dual Belt Sander

• Manufacturer: Timesavers

Model 75BGX, S# 19557K, 18" x 24" Table & 16" x 24" Table with vertical/horizontal travel, 12" x 144" Belt wet, Variable speed, 20hp, More info coming soon

Apex 20SDD 20" Dual Disc Sander

Model 20SDD, S# 3322, 20" Discs, 45° Tilting tables, 3hp 220/440v 3ph, More info coming soon

Timesavers 1111 Series Wet Belt Sander

• Manufacturer: Timesavers

Model 1111-11-0, S# 31114, 9"W x 60" Belt, 0 to 3" Bed opening, 10 to 30 fpm belt speed, 3.25" Dia. contact drum, Paper filter system, More info coming soon

Porter Cable BG-8 Wet/Dry Belt Sander

Model BG-8, S# 7650-C, 8"W Belt, Max 9", Table work area 17.5"W x 12"FB, T-Slotted, Trough around table, 5hp 220/440v 3ph, Coolant pump 1/4hp, Built in coolant, Operation manual, Overall Dim. 34"W x 4'L x 6' 2"H,...

Timesavers PUMA Single Head Wet Sander

• Manufacturer: Puma

Model PUMA, S# 31587, Date Mfg. 03-09, Table up/down w/ digital read out, New feed belt, Paper filter system, Dryer blower system, Squeegee rollers on exit, Safety trip bar across front, Electric brake, Drive mot...

State T-5 Oscillating Spindle Sander

Model T-5, S# 325, 27.5" x 32" Table, Tilting arbor from 0° to 45°, Variable speed spindle from 500 to 1,750 rpm, POSITIV-LOK Drawbar spindles, 3/4hp 120/240v 1ph, Floor space required 27.5" x 32", Est. Wt. 600 lbs.

Rockwell 31-700 Belt/Disc Sander

• Manufacturer: Toro

Model 31-700, DS6506, More info coming soon

Apex 16-S 16" Disc Sander

Model 16-S, S# 2804, 16" Disc, 45° Tilting table, 1hp 208-220/440v 3ph, More info coming soon