Used Processing in Opole, Poland

Cells

5 cells Inlet 30 x 30 cm Motor 0.75 kW – Width 75 cm – Depth 40 cm – Height 72 cm Cells are available for viewing and purchase in our warehouse by appointment – please contact us.

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Kohlbach biomass stove 400 KW heating power 29

Furnace with 400 KW heating power TYPE K 8 - 400 Furnaces for biomass, bark, woodchip, sawdust. Fuel feeder Heat exchanger from 2009

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Moving floors, scraper conveyors for furnaces

Single, double or triple scraper floors. We have pulling as well as pushing scrapers, depending on your needs. Scrapers range in length from 4 m to 7.50 m, width from 1.60 m to 2.10 m

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Paint pump, unit from the Swiss company Wagner

• Manufacturer: Wagner

Conveyor belt, conveyor belt TA 260

Horizontal length: 3.50 m, diagonal length: 2.50 m Belt width: 60 cm Discharge height: 180 cm

Transverse feeder 5-row ascending PP 227

Length ( transport road ) 4.80 m ( horizontal part 2.50 m , slant 2.30 m ) Width 4.00 m Distance between guides 150 x 90 x 90 x 60 cm Elevating feeder to a height of about 2,00 mm Motor 2 PS

Plate chain, transport

pitch 200 mm ( from pin axis to pin axis ) thickness of insert 10 mm width between inserts inner 45 mm width between inserts outer 65 mm height of plate 60 mm We have about 80 mb

Buffers, hot water tanks, capacity 18,000 l

Buffer with a capacity of 18,000 liters Height 458 cm Wall thickness 6 mm Diameter without insulation 2500 mm Diameter with insulation 2900 mm Two hot water buffers, sealed, freshly dismantled due to replacement ...

Emergency cooler for 3.5 MW furnace

A total of 8 fans, with high-performance coolers underneath. Cooler connections with 80 mm pipe flanges. Two segments, one segment will cool 1750 kW.

Atlas Copco GA 55 13 compressor

• Manufacturer: Atlas-Copco
• Model: GA 55

TYPE GA 55 Pressure 10 bar Engine 55 KW Year 2000

Conveyor belts , conveyor belts, driven TA 257, TA 258

Length 3.00 m Belt width 30 cm, belt with takers Total width 45 cm Height 35 cm