Used Pillar Drills & Drill Presses in Australia

Geared Head Drill

• Manufacturer: Sx power

Used Geared Head Drill Vice Drill chuck and Arbor 25mm Drilling Capacity Good working condition 415 volt Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Ou...

Geared Head Pedestal Drill

• Manufacturer: HXMC

Geared Head Pedestal Drill comes with Drill chuck and Arbor Round Table 25mm Capacity Since 1990, Shaw Machinery has been a trusted name in Engineering, with our origins dating back to 1968. Our seasoned, expert ...

Nider Geared Head Drill Press

Used Nider Geared Head Drill Press - $1000 + GST - excellent condition - 415v - keyless chuck - same as an Arboga - 100-1300 rpm - geared head - loading available

Brobo Waldown 8SN Pedestal Drill Press

• Manufacturer: Brobo

Used Brobo Waldown 8SN Pedestal Drill Press - $1500 + GST - 415v, 0.75kW motor - excellent condition, ex govt - t-slot table - Australian made - hand wind table lift and lower - tiltable table - 160 to 5500 rpm -...

Pedestal Drill

Strands S-53 geared head pedestal drill 3 morse taper, speeds 100-1360rpm (8 off) 2 speed 415 volt motor 1/1.2hp. Foot safety pedal Made in Sweden. Ex Govt.

Geared Pedestal Drill

Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg

Geared Head Pedestal Drill

ERLO TSAR-32 4mt, capacity 32mm drilling, 28mm tapping. spindle speeds 75-2100rpm (8 off), feeds 0.1-0.3mm/rev (3 off) 400mm x 420mm tilt table, 160mm quill travel, 70-885mm spindle to table 1.1kw 415volt, Coolan...

Waldown Radial Arm Pedestal Drill

Used Waldown Radial Arm Pedestal Drill - $1200 + GST - 240v! - Australian made! - in excellent condition - table has had some minor braze repairs - keyless chuck - table lifter - table can rotate - loading available

Erlo TCA-32

• Manufacturer: Erlo
• Model: TCA-32

Erlo TCA-32 Geared Head Pedestal Drill 4mt, 77-1280rpm, power feeds. 530mm x 450mm tilting table, coolant, light 1.5hp, 415volt. Machine weight 500kg

ERLO TSAR-32

• Manufacturer: Erlo

RLO TSAR-32 4mt, capacity 32mm drilling, 28mm tapping. spindle speeds 75-2100rpm (8 off), feeds 0.1-0.3mm/rev (3 off) 400mm x 420mm tilt table, 160mm quill travel, 70-885mm spindle to table 1.1kw 415volt, Coo...