Used Materials Testing in Shanghai, China

Numeric Liquid-Plastic Limit Combined Device

• Manufacturer: Shanghai Shengxian Instrument Equipements

Specifications: 8 hours continuous working Product name: Numeric Liquid-Plastic Limit Combined Device | Two models of -ysy-2 numeric liquid-plastic limit combined device are available: 100 g and 76 g | Max range:...

Length Gauge

• Manufacturer: Shanghai Shengxian Instrument Equipements

Suitable Standard: Meets BS 812 For determining elongation index. Particle is elongated when its length (longest dimension) is more than 1.8 of the midsize of the sieve fraction. Aggregate to be classified is sep...

Rock Point Lload Tester

• Manufacturer: Shanghai Shengxian Instrument Equipements

Used to determine the tensile and compressive strength of rock . Specification: Piston diameter:dia.35mm, stroke:160mm Capacity:100KN 5. Resolution: 0.1KN Peak value memorized

JM-3 Accelerate Polishing Machine

• Manufacturer: Shanghai Shengxian Instrument Equipements

This apparatus is used to imitate the polishing function between automobile tire and pitch road surface . Accelerate polishing aggregate that the road surface uses . In order to get the ...

Mortar Consistency Meter��Digital Display��

• Manufacturer: Shanghai Shengxian Instrument Equipements

suitable to determine mixing proportion, and control motar consistency in the construction process so that water quantity consumed could be adjusted. Specifications:

Large screen sensor Vickers hardness tester CHV-5Z

1. Purpose and scope of application: 1. Steel, non-ferrous metal, metal foil, hard alloy, metal sheet, microstructure, carbonization; 2. Carburizing, nitriding and decarburizing layer, surface hardening layer, el...

Concrete Cube Test Mould (Steel Material )

• Manufacturer: Shanghai Shengxian Instrument Equipements

Product Name : Concrete Cube Test Mould (Steel Material ) Cube Test Mould Concrete strength Test Mould ITEM NO : CM-SA CA-SA series Cube Mould is made from steel material, used for strength resistance for harde...

Cement Mortar Test Mould

• Manufacturer: Shanghai Shengxian Instrument Equipements

Product Name : Cement Mortar Test Mould Mortar Prism Mould Cement Mortar Flexure Mould ITEM NO : SX-SA-CS Three gang moulds for prisms 40 x 40 x 160mm is made of steel, base is made of cast iron. It conforms to ...

Plastic limit test

• Manufacturer: Shanghai Shengxian Instrument Equipements

Plastic limit test is used with Morized Plastic limid apparatus, when doing plastic limit tests, Configuration list : Standard factory list: Set comprises 1.. glass plate, 2. mixing dish, 3..spatula 4. 4 moistur...

Mortar Flexure Testing Machine

• Manufacturer: Shanghai Shengxian Instrument Equipements

Standard: The testing conforming with the requirements of (ISO test method), GB/T 17671-1999. Purpose: For flexural strength test of cement specimen and other nonmetallic material. Specification: Supplied with fl...

Sand Replacement Test Sets

• Manufacturer: Shanghai Shengxian Instrument Equipements

1、 Test the density of sand soil 、 sand-gravel material 、 graded gravel 、 cement stabilized soil 、 lime stabilized soil ,etc. 2、 Max.Diameter of above aggregates should less than 60mm . 3、 Thickness of tested lay...

Wet sieving Test Sets

• Manufacturer: Shanghai Shengxian Instrument Equipements

Wet sieving Test Sets Purpose & characters: The principle of wet sieving apparatus is following. Bring pressure to bear on the water, through the injecting nozzle wet sieving the drilling fluid and bononian stone...

Angularity / Fluidity Testing Meter

• Manufacturer: Shanghai Shengxian Instrument Equipements

Standard: JTJ058—2000 Transportation Department . Angularity / Fluidity Testing Meter is used to measure fluidity testing meter of natural sand, artifical sand and stone pieces , to further evalute fluidity , su...

Sand Replacement Test Sets

• Manufacturer: Arena

( Sand Pouring Cylinder ) for the onsite determination of the degree of compaction.

Export CBR Test Mould and Swell Parts

• Manufacturer: Shanghai Shengxian Instrument Equipements

Made from fine quality steel material, and machined treatment , smooth surface, Item NO Part Name Qty Remark EL-01 CBR TEST MOULD 1SET INCLUDING CYLINDER AND BASE PLATE Plate steel, 152.4mm dia. x 177.8 body hei...