Building Filters

Used Hammermills in Australia

Trusted Seller
Fitzpatrick Fitzmill Hammermill with Auger Feeder
- Manufacturer: Fitzpatrick
- Model: D6A
Fitzmill Hammermill with Auger Feeder, “Fitzpatrick” model D6A, high throughput rates of 200-1,000 kg/hr, auger screw feed system with hopper, 208V three phase, 18A full load Amp, 60Hz, complete with one intercha...
Sydney, Australia
Hammer Mill (CGM183)
Jeffery (BJD) Flex Tooth 24″ x 20″ hammer mill 20″ wide
$3,776 USD
Boolaroo, Australia
Twin Rotor Hammer Mill (CGM181)
JC Smale 15″ twin rotor hammer mill, Rotor diameter approx 500mm, inlet 375mm x 500mm. Powered by 2 x 18hp motors. Comes with 2 new spare rotors with hammers.
$11,327 USD
Get financing
Est. $222/mo
Boolaroo, Australia
Hammer Mill (CGM166)
Pennsylvania, 1850 mm long x 1000 mm dia.
$4,153 USD
Boolaroo, Australia
BUFFALO RA-25-HSS
- Manufacturer: Buffalo
Large heavy duty stainless steel dual stage hammer mill. Complete with feedchute, duscharge chute, St/Steel dust collector and control board. The two hammer mills can be run into each other (dual stage) or run as...
Melbourne, Australia
AGRICULTURAL PULVERISING LINE WITH AUGER, HAMMER MILL, BLOWER, AND HOPPER FEEDER 5020 L
- Manufacturer: AGRICULTURAL PULVERISING LINE WITH AUGER, HAMMER MILL, BLOWER, AND HOPPER FEEDER
FOR A STRICTLY LIMITED TIME, MERCURI TRADING IS ACCEPTING ALL REASONABLE OFFERS! PRODUCT INFORMATION: - Item: Agricultural Pulverising Line with Auger, Hammer Mill, Blower, and Hopper Feeder APPLICATION: "This co...
$10,298 USD
Get financing
Est. $202/mo
Campbellfield, Australia
INDUSTRIAL GRAIN HAMMER MILL 7.5HP
- Manufacturer: INDUSTRIAL GRAIN HAMMER MILL
This hammer mill is in good working condition. It is driven by a 7.5HP motor. It also has a vibratory feeder tray, driven by a 1HP motor
$6,865 USD
Get financing
Est. $135/mo
Campbellfield, Australia
PRESIDENT Type 12
- Manufacturer: PRESIDENT
12 x Swinging hammers 5 inch long. Mill has a 2mm screen. Main drive is a 11kw 1460 RPM motor belt driven. Feed inlet size is 100mm x 100mm
Melbourne, Australia
Lump Breakers
Heavy Duty Lump Breaker, 7.5kw motor @ 55rpm reduced to 5rpm on the blades. 400mm x 400mm throat, 50mm gap between fixed blades, last used to break up blocks of glass/resin. Can be used to break up many materials...
Melbourne, Australia
BUFFALO RA-25-HSS
- Manufacturer: Buffalo
Large heavy duty stainless steel dual stage hammer mill. Complete with feedchute, duscharge chute, St/Steel dust collector and control board. The two hammer mills can be run into each other (dual stage) or run as...
Melbourne, Australia
PRESIDENT Type 12
- Manufacturer: PRESIDENT
12 x Swinging hammers 5 inch long. Mill has a 2mm screen. Main drive is a 11kw 1460 RPM motor belt driven. Feed inlet size is 100mm x 100mm
Melbourne, Australia
FITZPATRICK;FITZMILL DASO-6
- Manufacturer: Fitzpatrick
- Model: DASO-6
Fitzmill DASO6, stainless steel hammer mill. The mill is powered by a 4kw motor and has a removable screen fitted which allows for homogenise milling to your desired size, it has a production rate of approx. 100-...
Melbourne, Australia
BUFFALO RA-25-HSS
- Manufacturer: Buffalo
Large heavy duty stainless steel dual stage hammer mill. Complete with feedchute, duscharge chute, St/Steel dust collector and control board. The two hammer mills can be run into each other (dual stage) or run as...
Melbourne, Australia
PRESIDENT Type 12
- Manufacturer: PRESIDENT
12 x Swinging hammers 5 inch long. Mill has a 2mm screen. Main drive is a 11kw 1460 RPM motor belt driven. Feed inlet size is 100mm x 100mm
Melbourne, Australia
Hammer Mill (New Spare Parts) (CGM155)
(New Spare Parts) for Hammerhead 1.5 (Kumbee Type) including sideliners and breaker part.
$5,664 USD
Get financing
Est. $111/mo
Boolaroo, Australia