Used Mineral Processing

10 x 10 in Linatex Slurry Pumps

• Manufacturer: Linatex

10x10 Linatex Slurry Pumps - Rebuilt ball mill feed pumps, rubber lined, 36" 4-belt pump sheaves

New Unused Krebs style Cyclones Made to Order

- New and unused cyclones made to order in Krebs and Denver styles - Fully assembled - Interior covered with 1/4 inch thick vulcanized rubber - Victaulic connections for feed and discharge - Variety of Apex and I...

18 x 10.5 ft (5.5 x 3.2 m) Fuller FLS SAG mill with 1,500 HP

SAG mill, 18 ft diameter, 10.5 ft length. - Manufactured by Fuller 1995 - Rubber-lined, used rubber liners included - 1500 HP, 4160 volt, 1192 RPM, continuous motor, 5010 frame Motor, rebuilt and inspected. - Sp...

5 x 3 ft (1.5 x 1 m) SAG mill with 20 HP

- Skid mounted - Chain-driven with rollers under shell - Falk gearbox Motor: - 20 HP (15 kW) - 1750 RPM - 256T frame - 230/460 V - 3 Ph - 60 Hz

13.5 x 4 ft (4 x 1.2 m) Marcy SAG mill with 300 HP

- 13.5 x 4 ft shell - Originally designed for dry grinding - removed, disassembled, and in storage ready for inspection and shipping - Mill trunnions and wear parts protected during storage - Trunnion bearings cl...

24 x 8 ft (7.3 x 2.5 m) Hardinge SAG Mill with 3,000 HP

• Manufacturer: Hardinge

- 2 Flender gearboxes - Liners quoted separately - 3,000 HP GE synchronous motor - Mill is disassembled and in storage

24 x 9 ft (7.3 x 2.7 m) Boliden Allis SAG Mill with 3,000 HP

24 x 9 ft (7.3 x 2.7 m) Boliden Allis reconditioned SAG Mill with 3,000 HP (2240 kW) GE motor - Mill shell in 1 section - Inching drive, 3 piece - Feed and discharge ends - Shell and discharge liners - Discharge ...

Equivalent in Performance with Type AH Horizontal Slurry Pumps

- Centrifugal seal - Cast casings and pedestal base - Equivalent to series AH pump - Liners are pressure molded vulcanized rubber - Impellers are rubber, polyurethane and steel are available - Fabricated over-sea...

Type B-6-6 Ash Pump with 100 HP (74 kW) motor

Type B-6-6 Ash Pumps with 100 HP (74 kW) motor - Three units available.

12 x 5 ft Outotec Unused Surplus SAG Mill with 350 HP

• Manufacturer: Larox

- Unused surplus Meso Outotec SAG mill - Still in factory packaging - Delivered, never installed or used - 12.1 ft diameter (3.7 m) - 5 ft length (1.5 m) - Trunnion supported mill with ring and pinion gearset - 3...

20 x 10 ft (6.1 x 3.05 m) ANI FLSmidth SAG Mill with 2,500 HP

• Manufacturer: FLSmidth

- 20 ft diameter by 10 ft shell (6.1 x 3.05 meter) - Manufactured by ANI/FLS - Includes WEG 2,500 HP motor - Enclosed gear drive made by David Brown - Inching drive - Mill is currently operational and installed -...

21 x 11 ft Hardinge SAG mill with 2,875 HP

• Manufacturer: Hardinge

21 x 11 ft Hardinge SAG mill with 2,875 HP - Mill is currently removed and in storage - Without liners or bolt package - Nuttall gear reducer - McLellan liner handler available separately - Spare motor available...

22 x 7 ft (6.7 x 2.1 m) Hardinge SAG Mills

• Manufacturer: Hardinge

22 ft x 7 ft (7 x 2 m) Hardinge SAG Mills - Motor Quoted separately - Previously ran on two 800 HP motors - Dual Flender gearboxes - Shell reconditioned

32 x 12 ft (9.8 x 3.6 m) Hardinge Koppers ( Metso) SAG Mill 6800 HP

• Manufacturer: Hardinge

32 x 12 ft (9.8 x 3.7 m) Hardinge Koppers SAG Mill 6800 HP (5100 kW) Two GE wound rotor induction motors: - 3400 HP - 710 RPM - 4000 V - Includes motor starter. - Includes lube system and temperature sensors. - F...

36 x 17 ft (11x5m) Unused FLS SAG Mill with 18,350 HP (13,5009 kW)

- Unused surplus FLS Fuller-Traylor SAG mill - ABB brand 13,500 kW (18,350 HP) drive - Wrap around style drive motor - Braking system - Complete liner package - Feed chute - Hydraulic jacking system - Specialty t...