Building Filters
- Trusted Seller
"BAADER"175 - processing line for flounder and flatfish
- Manufacturer: Baader
- Model: 175
"BAADER"175 - processing line for flounder and flatfish Dimensions: - Length - 3,450 mm; - Width - 2,900 mm; - Height - 2,100 mm. Technical data: - Service - 2 people; - Maximum capacity - 40 fish/min.; - Wor...
Siemyśl, Poland - Trusted Seller
Fish slicer "Baader" 383
- Manufacturer: Baader
Fish slicer "Baader" 383 Technical data: * Type - 0383; * Machine number - 114912; * Current belt spacing of the bell - 40 mm; * Length of fish - up to 900 mm; * Width of the work surface for fish - 1,000 mm; *...
Siemyśl, Poland - Trusted Seller
Separator for separating meat from bones, bones and tendons, "Baader" 697
- Manufacturer: Baader
- Model: 697
Separator for separating meat from bones, bones and tendons, "Baader" 697 Dimensions: * Length - 1.780 mm; * Width - 930 mm; * Height - 1.530 mm. Technical data: * Capacity - approx. 1,200 kg / hour (depending ...
Siemyśl, Poland - Trusted Seller
Baader 185 - a machine for filleting cod and salmon fish
- Manufacturer: Baader
- Model: 185
Overall dimensions: * Length – 6,900 mm; * Width – 1,860 mm; * Height – 1,500 mm. Technical specifications: * Operation – 1 person; * Suggested capacity – 24-32 fish/min (depending on fish size); * Operating cap...
Białokury, Poland - Trusted Seller
Fillet, degreaser, gutting machine for flat fish, flounder, etc. "BAADER" 170
- Manufacturer: Baader
Fillet, degreaser and eviscerator for flat fish-flounder, etc. "BAADER" 170 Dimensions: - Length - 2,500 mm; - Width - 1,150 mm; - Height - 1,800 mm. Technical data: - Service - 1 person; - Fish length - 25 -...
Siemyśl, Poland 
1976 Baader 694
- Manufacturer: Baader
- Model: 694
Fully refurbished bone separator. Frame sandblasted and painted with two layers - primer and powder. All bearings and seals new. Drum after refurbishment with holes 3mm. New belt and scraper.
Bialogard, Poland
2015 Baader 52
- Manufacturer: Baader
- Model: 52
A little used skinning machine only 185 working hours but It hasn't been used for 10 years so the bearings, chains, seals and rubber parts have been replaced as a preventive maintenance.
Bialogard, Poland- Trusted Seller
Łabiszyn, Poland - Trusted Seller
1998 Baader 605
- Manufacturer: Baader
- Model: 605
Baader 605 Soft Separator Superb condition Baader 605 from 2009. Ideal machine to process/separate many types of poultry, meat, vegetable and fish products. The capacity is up to 3.500 kg per hour. This partic...
Warsaw, Poland - Trusted Seller
Baader 605
- Manufacturer: Baader
- Model: 605
Baader 605 Soft Separator Superb condition Baader 605 from 2009. Ideal machine to process/separate many types of poultry, meat, vegetable and fish products. The capacity is up to 3.500 kg per hour. This partic...
Warsaw, Poland - Trusted Seller
BAADER 221
- Manufacturer: Baader
BAADER 221 PELAGIC FISH PROCESSING LINE Best performance with a wide scale of opportunities The solution for pelagic processing has a wide range of possibilities. From manual fed heading and gutting to fully a...
Warsaw, Poland - Trusted Seller
Baader 51
- Manufacturer: Baader
- Model: 51
The BAADER 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, i.e. right where the skin begins. Thi...
Warsaw, Poland - Trusted Seller
Baader X-ray scanner
- Manufacturer: Baader
Baader 886 X-ray scanner, type: MXR-75HP/20, article number: 915377.51, serial number: 485554, year of construction: 2014, focal spot: d= 1.0 mm, dimensions: 3800 mm x 1100 mm x 2300 mm.
Bożacin, Poland - Trusted Seller
1998 Baader 434
- Manufacturer: Baader
- Model: 434
The BAADER 434 is a unique heading machine for salmon and sea trout. Its result is a perfect U-cut which leaves the neck flesh on the trunk, increasing yield to the maximum.The cutting result is fairly independen...
Warsaw, Poland - Trusted Seller
Baader Separators
- Manufacturer: Baader
Baader mobile separator, type: 696, machine number: 12 5653 0696, year of construction: 1978, 380 V, 3 Ph, 50 Hz, 3.7 A, perforations drum: 1 mm and 3 mm, total dimensions: 1100 mm x 650 mm x 1040 mm. Including B...
Bożacin, Poland 
Baader 51 Fish Processing
- Manufacturer: Baader
- Model: 51
Good condition Baader 51 Fish Processing available between 1987 and 1989 years. Located in Netherlands and other countries. Click request price for more information.
Netherlands
