Building Filters
- Trusted Seller
Fish slicer "Baader" 383
- Manufacturer: Baader
Fish slicer "Baader" 383 Technical data: * Type - 0383; * Machine number - 114912; * Current belt spacing of the bell - 40 mm; * Length of fish - up to 900 mm; * Width of the work surface for fish - 1,000 mm; *...
Siemyśl, Poland 
1976 Baader 694
- Manufacturer: Baader
- Model: 694
Fully refurbished bone separator. Frame sandblasted and painted with two layers - primer and powder. All bearings and seals new. Drum after refurbishment with holes 3mm. New belt and scraper.
Bialogard, Poland- Trusted Seller
"BAADER"175 - processing line for flounder and flatfish
- Manufacturer: Baader
- Model: 175
"BAADER"175 - processing line for flounder and flatfish Dimensions: - Length - 3,450 mm; - Width - 2,900 mm; - Height - 2,100 mm. Technical data: - Service - 2 people; - Maximum capacity - 40 fish/min.; - Wor...
Siemyśl, Poland 
2015 Baader 52
- Manufacturer: Baader
- Model: 52
A little used skinning machine only 185 working hours but It hasn't been used for 10 years so the bearings, chains, seals and rubber parts have been replaced as a preventive maintenance.
Bialogard, Poland- Trusted Seller
Łabiszyn, Poland - Trusted Seller
Baader 185 - a machine for filleting cod and salmon fish
- Manufacturer: Baader
- Model: 185
Overall dimensions: * Length – 6,900 mm; * Width – 1,860 mm; * Height – 1,500 mm. Technical specifications: * Operation – 1 person; * Suggested capacity – 24-32 fish/min (depending on fish size); * Operating cap...
Białokury, Poland - Trusted Seller
Separator for separating meat from bones, bones and tendons, "Baader" 697
- Manufacturer: Baader
- Model: 697
Separator for separating meat from bones, bones and tendons, "Baader" 697 Dimensions: * Length - 1.780 mm; * Width - 930 mm; * Height - 1.530 mm. Technical data: * Capacity - approx. 1,200 kg / hour (depending ...
Siemyśl, Poland - Trusted Seller
Fillet, degreaser, gutting machine for flat fish, flounder, etc. "BAADER" 170
- Manufacturer: Baader
Fillet, degreaser and eviscerator for flat fish-flounder, etc. "BAADER" 170 Dimensions: - Length - 2,500 mm; - Width - 1,150 mm; - Height - 1,800 mm. Technical data: - Service - 1 person; - Fish length - 25 -...
Siemyśl, Poland - Trusted Seller
Baader Separators
- Manufacturer: Baader
Baader mobile separator, type: 696, machine number: 12 5653 0696, year of construction: 1978, 380 V, 3 Ph, 50 Hz, 3.7 A, perforations drum: 1 mm and 3 mm, total dimensions: 1100 mm x 650 mm x 1040 mm. Including B...
Bożacin, Poland - Trusted Seller
Baader 51
- Manufacturer: Baader
- Model: 51
The BAADER 51 is a skinning machine for fillets cut from white fish, blue whiting, halibut and red fish. This machine seizes the skin without initial cut from the tail end, i.e. right where the skin begins. Thi...
Warsaw, Poland - Trusted Seller
Linco/BAADER Proflex
- Manufacturer: Baader
- Model: PROFLEX
Complete system including 2017/2020 Rehanger EV/Grader Wholebird grader Rehanger Grader/cut up system Newest Linco Proflex cut-up line with all HY modules Hanging Area – 2,2 m Neck Cutter Wing Stretcher Whol...
Poland - Trusted Seller
BAADER 221
- Manufacturer: Baader
BAADER 221 PELAGIC FISH PROCESSING LINE Best performance with a wide scale of opportunities The solution for pelagic processing has a wide range of possibilities. From manual fed heading and gutting to fully a...
Warsaw, Poland - Trusted Seller
Baader X-ray scanner
- Manufacturer: Baader
Baader 886 X-ray scanner, type: MXR-75HP/20, article number: 915377.51, serial number: 485554, year of construction: 2014, focal spot: d= 1.0 mm, dimensions: 3800 mm x 1100 mm x 2300 mm.
Bożacin, Poland - Trusted Seller
Baader 187
- Manufacturer: Baader
- Model: 187
BAADER 187 Whitefish Filleting Machine This machine is designed to fillet cod, haddock, pollock, hake, white and other fish with similar bone structure. Fish with an overall length of 30-55 cm may be loaded on t...
Warsaw, Poland - Trusted Seller
Baader 185
- Manufacturer: Baader
- Model: 185
Baader fish filleting and skinning machine, type filleting machine: 185, type skinning machine: 51, plastic belt, belt width: (2x) 160 mm, s/s mesh belt, belt width: 365 mm, working width: 410 mm, working range o...
Warsaw, Poland 
Baader 51 Fish Processing
- Manufacturer: Baader
- Model: 51
Good condition Baader 51 Fish Processing available between 1987 and 1989 years. Located in Netherlands and other countries. Click request price for more information.
Netherlands
