- Trusted Seller
2009 Kemper Filter-Master
- Manufacturer: Kemper
- Model: -MASTER
Supply voltage: 400 V | Airflow: 1200 m³/h | Machine weight: 80 kg
Brno, Czech Republic - Trusted Seller
2007 KOMFI AMIGA
- Manufacturer: Komfi
- Model: AMIGA
Equipment: Replacement heating coil Lower pressure roller Rear traction roller Compressor BECKER
Brno, Czech Republic - Trusted Seller
2001 MTA TAE 081/P1
- Manufacturer: MTA
- Model: TAE
Cooling performance: 30.1 kW | Integrated tank volume: 140 l | Machine dimensions: 1865 x 760 x 1447 mm | Machine weight: 451 kg
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
1995 Battenfeld BA 250/50 Plus
- Manufacturer: Battenfeld
Control system: Unilog 1020 | Clamping force: 250 kN | Injection capacity: 49 cm³ | Injection weight: 44.6 g | Height of the plate for mounting the mold: 470 mm | Width of the plate for mounting the mold: 280 mm...
Brno, Czech Republic - Trusted Seller
2016 HV VMD GRYGOV TKS070.EKZVO
- Manufacturer: HV VMD GRYGOV
Power input: 73 kW | Maximum temperature: 450 C | Weight: 2100 kg
Brno, Czech Republic - Trusted Seller
2019 Schneider UniMaster ST
- Manufacturer: Schneider
- Model: UNIMASTER ST
Tank - 272 L Power - 4 kW Working pressure - 11 bar
Brno, Czech Republic - Trusted Seller
2004 Atlas Copco GA 110
- Manufacturer: Atlas-Copco
- Model: GA 110
with integrated dryer and dewatering unit. Total hours: 81942 h | Max pressure: 7.3 bar | Nominal power: 117 kW
Brno, Czech Republic - Trusted Seller
2020 Sand blasting equipment
- Manufacturer: Arena
- Noise level: 80 decibel
IP67 5000 lm -40 °C to 55 °C Accessories 5 pcs ceramic nozzles (3 × 6 mm 2 × 7 mm) 1 pc sandblasting gun (industrial type) 2 pcs protective films for viewing window 1 pc cyclone tank (dust collector) 1 pc foot ...
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
2023 KRAPCO CASEPA 150
- Manufacturer: KRAPCO
Machine dimensions:: 1150 x 1450 x 1800 mm Weight of the boxes: 20-1000 g | Max speed: 150 1/min
Brno, Czech Republic - Trusted Seller
Brno, Czech Republic - Trusted Seller
1989 ENGEL ES 200/65
- Manufacturer: Engel
- Model: ES 200
Hours on: 10000 h | Clamping force: 65 t | Screw diameter: 30 mm | Injection capacity: 10-90 cm³ | Height of the plate for mounting the mold: 150-430 mm | Distance between the columns (horizontal): 405 mm | Dist...
Brno, Czech Republic - Trusted Seller
2023 FINI CUBE 5.5-10-270-ES
- Manufacturer: Fini
- Model: Cube 5
Hours on: 2167 h | Efficiency: 705 l/min | Working pressure: 10 bar | Machine weight: 203 kg
Brno, Czech Republic 
Buzuluk 10502 Plastic/Rubber Processing
- Manufacturer: Buzuluk
- Model: 10502
Good condition Buzuluk 10502 Plastic/Rubber Processing. Located in Czech Republic and other countries. Click request price for more information.
Czech Republic
Tip: Enter manufacturer, model or keyword