Used Machine Tools in Tuscany, Italy

C.L.O.M.E.A. PA02
- Manufacturer: C.L.O.M.E.A.
PA02 PVC runner to support the stretched winglet (only for mono-run bending).
Scandicci, Italy
C.L.O.M.E.A. AT0003
- Manufacturer: C.L.O.M.E.A.
AT0003 Equipment to correct and calibrate the curves.
Scandicci, Italy
C.L.O.M.E.A. PA01
- Manufacturer: C.L.O.M.E.A.
PA01 PVC runner kit to contain the stretched winglet, including washers for the alignment with the rollers.
Scandicci, Italy
C.L.O.M.E.A. AT0005
- Manufacturer: C.L.O.M.E.A.
AT0005 Equipment to better contain the profile and improve its dragging.
Scandicci, Italy
C.L.O.M.E.A. AT0001
- Manufacturer: C.L.O.M.E.A.
AT0001 Manual lower fourth roller to better contain and drag the profile.
Scandicci, Italy
C.L.O.M.E.A. AT0002
- Manufacturer: C.L.O.M.E.A.
AT0002 Lateral support for bar-reading encoder.
Scandicci, Italy
C.L.O.M.E.A. PIM
- Manufacturer: C.L.O.M.E.A.
PIM Software and Hardware with manual input of the bar-feeding speed, to allow the execution of very short radii and to work on short arcs.
Scandicci, Italy
C.L.O.M.E.A. A2002DR
- Manufacturer: C.L.O.M.E.A.
A2002DR Digital reading arcmeter with direct detection of radius and sagitta. Equipped with two interchangeable reading bars, with centre-to-centre distance 120 and 240 mm.
Scandicci, Italy
C.L.O.M.E.A. A2003D
- Manufacturer: C.L.O.M.E.A.
A2003D Digital reading arcmeter complete with software and WI-FI connection for the automatic management of the springback calculation. Equipped with two interchangeable reading bars, with centre-to-centre distan...
Scandicci, Italy
C.L.O.M.E.A. RU130PRU130MP
- Manufacturer: C.L.O.M.E.A.
RU130P Two roller benches extensions to support the profiles during the bending process. RU130MP Two reinforced roller benches extensions to support the profiles during the bending process.
Scandicci, Italy
C.L.O.M.E.A. A2002D96
- Manufacturer: C.L.O.M.E.A.
A2002D96 Reading bar with centre-to-centre distance 960 mm to detect large radii.
Scandicci, Italy
C.L.O.M.E.A. A2002D48
- Manufacturer: C.L.O.M.E.A.
A2002D48 Reading bar with centre-to-centre distance 480 mm to detect large radii.
Scandicci, Italy
C.L.O.M.E.A. AT0007
- Manufacturer: C.L.O.M.E.A.
AT0007 Stiffening tie-beam for the central shaft.
Scandicci, Italy
C.L.O.M.E.A. AT0018
- Manufacturer: C.L.O.M.E.A.
AT0018 Quality control table for curved profiles, complete with additional shelf, storage compartments for PVC and PE filling strips, compressed air connections and adjustable blocking and stabilizing bars.
Scandicci, Italy
C.L.O.M.E.A. AT0023
- Manufacturer: C.L.O.M.E.A.
AT0023 Trolley for rollers.
Scandicci, Italy