Used Foundry & Casting in Wallonia, Belgium

Vibrating conveyor 1840 mm x 235 mm

2 Vibrating motors 380 V, 0,4 A Outside dimensions: 1970 mm  x 750 mm, h. 500 mm | Useful dimensions: 1840 mm  x 235 mm, h. 140 mm | Weight: 500 kg

Extraction belt 1750 x 585mm

Gearmotor LEROY SOMER, 3 hp, 1430 rpm, 8,6/4,95 A, 220/380 V Rollers Ø 89mm, length 690mm Width of rubber 585mm, axle distance 1750mm Width of rubber Ø 210mm, band speed 0,45m/s

Rubberbelt conveyor ± 100 mm x 1000 mm

1 roll, 3 plis, thickness 9 mm, max. 180 °C Dimensions: ± 100 m x 1000 mm | Quality: new

Hardrubber protection for shakeouts 1,43 m x 1,15 m

• Manufacturer: DIGANT

Brand: GIGANT, weight: ± 75 kg Hole pattern 50 mm x 50 mm Width between hole pattern 30 mm Temperature resistance 70 °C, maximum 80 °C Molded and vulcanised Preserving and sound-absorbing For foundries, recycling...

Pneumatic slag gripper

Dimensions: 1000mm; Width: 860mm; Height: 2400mm On stand With crane eye Pneumatically controlled (connections above) All existing jaws are supplied 2 different models for casting flat jaws and square jaws

Moulding line for chemical sand FDC/AXMANN

• Manufacturer: Axmann

With sand regeneration With AXMANN- mixer 30 rpm, connection arm, pumps, cistern 2000 l With vibration table, robust roll conveyors 3 motorised transfer carriages With cooling vibrating conveyor, length 18 m With...

Core sand mixing installation STEFFENS ±2t/h

• Manufacturer: STEFFENS

System consisting of mixer, hopper, transfer trolley and dosing station for resin and hardener Mixer: External dimensions: Length: 700 mm; Width: 900 mm; Height: 1500 mm Usable dimensions: Ø600 mm; Depth: 460 mm ...

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

Gasing unit LÜBER LW-FDA-825; 8kW

• Manufacturer: Lüber
• Model: LW-FDA 825

With 8 kW heating With contactor control and stainless steel storage tank 30 l Compressed air control via proportional valve With micro pump, gas dosing via rotameter

1980 Dry Discgrinder HERZOG HT 350-2

• Manufacturer: Herzog

Type: HT350-2, Year: 1980, in very good conditions With installed dust filter

1989 Vibrating dryer TECHNOFINISH

• Manufacturer: TECHNOFINISH

Make: TECHNOFINISH | Weight: ± 1000 kg | Dimensions: Ø 1560mm, height 1300mm | Motor: 380 V, 50 Hz | Useful width: max. 450mm

8 Ingots moulds 2 x ±4l

Dimensions: Length: 1100 mm, width: 300 mm; height: 230 mm Internal dimensions bottom: 150 x 110 mm; top: 220 x 370 mm with round trunions, 1 side with square pin in suplement for tilting Without support construc...

Ingot 10 steel trestles for residual liquid max +- 400 C°

• Manufacturer: Stahl

10 moulds with a volume of ±3l External dimensions: Length: 1500mm; Width: 750mm; Height: 800mm Mould dimensions: Length: bottom: 550mm; Length: top: 640mm; width at top: 110 mm; width at bottom: 30 mm Fold back ...

2018 Mixing plant for core sand LORAMENDI 6t/h

• Manufacturer: Loramendi

Consisting of: -1 Sand bunker -1 Temperature control system 4.8t/h -1 Weighing hopper -1 Core sand mixer LORAMENDI; MDR1,5 150kg / filling; 90s mixing time / filling -2 Dosing tanks for resin and hardener -2 Tank...

Magnetic steerer STUART with heating

• Manufacturer: Stuart

Dimensions: Length: 170mm; Width: 250mm; Height: 140mm 750W; 230V; 50Hz; Temperature adjustable with button Speed adjustable in 9 steps