Used Extruders

Industrial Twin Screw Extruder – Krauss Maffei Model KMD90, Electrically Heated, Oil Cooled Barrel

• Manufacturer: Krauss-Maffei

52102001 Used 90mm Krauss Maffei Model KMD90 Counter-Rotating Twin Screw Extruder. Has electrically heated oil cooled barrel. Driven by 40HP DC motor with SCR control. Includes temperature control panel.

APV Baker Perkins MP50/25D Twin Screw Extruder – 330 LBS/HR Capacity

• Manufacturer: Baker Perkins

51164005 Used APV Baker Perkins Twin Screw Extruder, type MP50/25D. 50 mm dia. twin screws. 25:1 L/D. Co-rotating. Electrically heated, water cooled. Max Screw speed 500 RPM via a gearbox by a 55.2 KW (74hp)-3/50...

Gloucester 25225R2 Single Screw Extruder – 2.5" Dia., 32:1 L/D, 60 HP Motor

• Manufacturer: GloucesterGloucester

10755152 Used Gloucester Single Screw Extruder, Model 25225R2. 2.5' Diameter Screw, 32:1 L/D. Has an electrically heated, air cooled, and non-vented barrel at approximately a 65? center line height. Barrel is se...

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder

• Manufacturer: Davis-Standard
• Model: Thermatic

6″ Davis Standard 30:1 – 300 HP AC – Model 600S Thermatic Extruder 6″ Davis Standard Model 600S Thermatic Extruder 8″ x 8″ water cooled square feed throat, all new gearbox bearings (less thrust) 17.21 gearbox rat...

Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder

Coperian 30 mm – ZSK-30 – New 2010 Co-Rotating Twin Screw Extruder Screw Diameter 30mm L/D Ratio 30:1 Number of Zones: 9-1 Feed, 3 Vented, 1 Side Feeder & 4 non vented Includes Side Feeder 15 HP Water Cooling 4...

Shangha Target 11" Rolling & Scoring Line with Extruder – Chiclet Production

52189024 Used Shangha Target 11" Rolling & Scoring Line with Extruder. Designed to make chiclets. Consisting of: Twin Screw extruder with 5" diameter screws, electrically heated, die for 11.5" sheet, Dusting conv...

Davis Standard 1.5" Extruder – Model 150IN DS-20, 24:1 L/D, Vented Barrel, 50 HP Gearbox

• Manufacturer: Davis-Standard
• Model: 150IN DS-20

10755179 Used Davis Standard 1.5" Extruder, Model 150IN DS-20. 24:1 L/D vented barrel at a 42" centerline. Davis Standard 6.53:1 gearbox rated for 50 HP with a service factor of 1.25 for a 152 RPM screw speed. Ge...

3.5″ NRM PM70 -24:1 N/VENTED AIR COOLED EXTRUDER

Lleal AME-2600 SF-H Double Sigma Extruder Kneader | 350 Gal Working | Vacuum Rated | 300 HP

• Manufacturer: Sigma

54020001 Used Lleal Model AME-2600 SF-H Double Sigma Extruder Kneader, 316 Stainless Steel. Useful volume 350 gallon, total volume 2,600 liter (680 gallon). Vacuum Rated 356 degrees F at 60psi. Sigma blades. Hyd...

75mm Davis Standard “Super Blue” Extruder 24:1 – Air Cooled 2013

• Manufacturer: Davis-Standard

3.5″ Davis Standard 24:1-Air Cooled -N-Vented Extruders (3) 1998

• Manufacturer: Davis-Standard

3.5″ Davis Standard Extruders Model #MV35IN35 – New 1998 (Three Available) Air Cooled 24:1 L/D Non-Vented HP 158 Gear Ratio: 17.39 SF 1.25

Italtech Sandore Pasta Mixer Extruder – Model MX180DH | 200 kg/hr | 195mm Die | 8.5 kW | Built 2008

• Manufacturer: SandoreSandore

53530001 Used Italtech Sandore Pasta Mixer Extruder, Model MX180DH. 200 Kg/hour extrusion production; 30 kg extruder basin dough capacity; 50/kg mixer/kneader basin dough capacity; 195mm die dimension; Vacon X-Se...

Buy Farrel Co-Rotating Twin Screw Extruder with Gala & Acrison Feeder

• Manufacturer: Acrison

54182001 Used Farrel Twin Screw Pelletizing Line Consisting Of: (1) Farrel 37 mm FTX80 co-rotating twin screw extruder, 5 zone electrically heated, water cooled, approximately 40:1 L/D. Driven by a 25 hp, 500 vol...

Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled

• Manufacturer: Davis-Standard

10755162 Used Davis Standard 10" Extruder, Model 100TH100D. 38:1 L/D ratio; (8) zone electrically heated, water cooled and non-vented barrel at nominal 44" center-line. 15.08:1 Gearbox reduction ratio; Rated at 1...