Used Extruders

3.5″ Davis Std. Rubber Extruder – New 2006

• Manufacturer: Davis-Standard

3.5″ Davis Std. Rubber Extruder – New 2006 Model 35IN35DSRE 20:1 L/D Ratio Gearbox Ratio: 17.39.1 257 HP DIMENSIONS: 66″W x 120′ L x 78″ High Dyn. Thrust Cap. 408,300 lb. Dyn Thrust Cap. 185,204 KG Liters: 6 WE...

Industrial Plastic Extruder – Johnstech 50mm, 28:1 L/D, Variable Speed

• Manufacturer: Johnstech

10678044 Used Johnstech Single Screw Extruder; Screw diameter 50mm L/D 28:1; Model XJ50 -28D; 22kw AC Motor 415v With Variable Speed Drive; Speed range 10 to 150rpm; Complete with Electrical Panel; Last used to m...

Insta-Pro Model 2000 RC Continuous Extruder – 125 HP Motor, High-Capacity Processing

• Manufacturer: Insta-ProInsta-Pro

53147054 Used Insta-Pro Model 2000 RC Continuous Extruder. Rated capacity approximate 1,300 - 3,840 pounds per hour. Includes extruder barrel and main worm shaft assembly. Driven by 125 HP motor. ...

1 1/4″ Davis Standard Extruders (Stripers) 4 Available

• Manufacturer: Davis-Standard

Gloucester 2.5" Single Screw Extruder – 32:1 L/D, Air-Cooled & Vented

• Manufacturer: GloucesterGloucester

10755144 Used Gloucester 2.5" Extruder 32:1 L/D five (5) zone air cooled and vented barrel at a 45" centerline height. Top center feed throat. Driven by a 50 HP A/C 1750/2100 RPM motor, includes 6 zone temperat...

3.5″ Polytruder 24:1 Air Cooled Extruder

3.5″ Davis Std. 75 HP Air Cooled Extruder

• Manufacturer: Davis-Standard

1997 Davis Standard 3.5 Inch Single Screw Extruder:

Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder

• Manufacturer: Leistritz

10151570 Used Leistritz ZSE 100 GLAAX 100mm Co-Rotating Twin Screw Extruder, Driven by 330 kw (442 hp), 1600 rpm DC motor with SCR control. Has 300 rpm screw speed, rated at 5000 Newton meters per shaft torque c...

Imperia & Monferrina P6 Automatic Fresh Pasta Extruder – 12 kg/hour Production

• Manufacturer: Imperia & Monferrina

53859001 Used Imperia & Monferrina Automatic Fresh Pasta Extruder, Model P6. 12 kg/hour pasta production; 6 kg capacity kneading vat; 89 mm die diameter; Automatic cutter with speed controls. Includes Multipasta ...

4.5″ Davis Standard Extruder MV45IN45 1997

• Manufacturer: Davis-Standard

4.5″ Davis Std. Extruder MV45IN45 – New 1998 Water Cooled 24:1 N-Vented

Gloucester 2522 R2 2.5" Extruder – 60 HP, 32:1 L/D, Reconditioned

• Manufacturer: GloucesterGloucester

10755143 Used Gloucester Model 2522 R2 2.5" 32:1 L/D Extruder with an electrically heated, water cooled (closed loop) vented and plugged barrel at approximately a 72" centerline height. Gearbox has a reduction ra...

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned

2.5″ Akron/EDS Akron 36:1 Extruder Reconditioned 42″ Centerline – 36:1 L/D Ratio – 6″ x 3.5″ feed throat, Belt Driven through a 13.95:1 Koellman PEZS 360/3.5 Gearbox, Rated to 125 HP, 75 HP Baldor DC Motor with R...

6″ Davis Standard 30:1 Extruder

• Manufacturer: Davis-Standard

Pre-Owned Killion KL-075 Single Screw Extruder – Electrically Heated, Air-Cooled

• Manufacturer: KillionKillion

54037006 Used Killion KL-075 Single Screw Extruder. 19.1 mm Diameter screws. 25:1 L/D. Screw speed 12-120 RPM via a gearbox by a 1.1 kW-380 volt/50cycle/3Ph DC motor. 3 housing sections. Electrically heated, air ...