Used Drilling Rigs

2005 LLAMADA P90-TT CFA DRILL RIG #924T

• Manufacturer: Llamada

Manufactured 2005, 21m drill depth, 350mm-850mm diameter, 9,700 kg/m / 70,000# rotary torque with 3 speed tophead, telescopic 7 ton counterweight, 52 ton overall weight of rig (without augers), Deutz diesel 254HP...

TRACK MOUNTED DRILL RIG MODEL ZY500 (CHINESE MADE) #3605Tc

Manufactured 2015, 2 available, 100 hours on each rig Price: $195,000 each GARDNER

1973 PORTADRILL 10TL TOP HEAD DRIVE DRILL RIG #2916Tb

• Manufacturer: Portadrill

Manufactured 1973, top drive updated to a Foremost 5000 ft/lb torque head, standard 36’ mast can pull 30’ rods, but only makes connections with 20’ pipe, 3” plumbing, 2-1/2” swivel hose, 3 x 4 Mission mud pump, n...

GEOPROBE 6610DT DIRECT PUSH AND AUGER DRILL RIG #2335T

Manufactured 2001, original owner, GH60 hammer, GA2000 auger head attachments, aux hydraulic connection, rear stabilization, outriggers, rod rack, rear receiver hitch, currently working Price: $53,500 GEOPROBE 6600

1997 CANTERRA CT-350 MUD ROTARY DRILL RIG #1520Tc

Manufactured 1997, Gardner Denver 5 x 6 mud pump, Rineer sliding top drive (7500 lbs rotary torque), 28,000 lbs pullback, 35000 lb wireline winch, 12000 lb winch, mast has sliding base and wig wag, mounted on 200...

WILSON MOGUL 42 DRILL RIG #2750T

• Manufacturer: Wilson

96’ x 150,000# telescoping derrick, 300,000# hook load capacity. Substructure 10.8’ height (casing pulling), 14’ (drilling/workover), 225,000lb load capacity (workover) or 400,000# (drilling). Cat 3406 diesel eng...

2005 Sandvik Pantera 1500

• Manufacturer: Sandvik

21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age

2024 SOOSAN JD800E-II

• Manufacturer: Soosan

New 2024 Soosan JD800E-II Rock Commander w/ QSB6.7 Series Tier 4 Final Equipped with JET9II Drifter 235 CFM @ 150 PSI Air Package Can be setup for T38, T45, or T51 – Customer Choice Unit starts a 14’ft starter st...

2019 Furukawa HCR1450EDII Stock# 4501

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Machine weight: 16,460 kilogram

Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition.

2006 Atlas Copco ROC D3

• Manufacturer: Atlas-Copco
• Model: ROC D3

Equipped with COP 1240 Drifter 28 hours on machine since upgrades: New track chains New Ecm motor control New mast roller New cable New nose cone seals New accumulator diaphragms 2 new control switches at control...

1997 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Ready to work – Repairs needed are one door with broken hinges – Fuel stop solenoid – This machine has a new air end and has less than 200 hours on hydraulic pump

2005 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A – Ready to work – Repairs needed are inoperable fuel stop solenoid

2006 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Repairs needed or in the process of being repaired – Dust collector top new part has been fabricated need’s installed – Rod changer arm is broken have new parts to replace purchase...

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Mechanic believes there is a broken pin in the fuel injection pump machine will idle but will not idle up. – Other repairs needed are inoperable fuel stop solenoid

2004 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Comes with YH70 not currently installed but will be mounted for transport – This unit has tracking issues will move but unknown if it’s the final drives or hydraulic motors. – Hammer needs to be mounted back on...

Atlas-Copco ECM 660 III Drilling Rig

• Manufacturer: Atlas-Copco
• Model: ECM 660 III

Good condition Atlas-Copco ECM 660 III Drilling Rigs available between 2004 and 2006 years. Located in USA and other countries. Click request price for more information.