Building Filters

17

Used AXA in Czech Republic

  • Trusted Seller
    2012 AXA DBZ

    2012 AXA DBZ

    • Manufacturer: AXA
    • Model: DBZ

    Obráběcí centrum DBZ řídícím systémem Heidenhain iTNC 530 je v dobrém technickém stavu. Po dohodě možné vidět v chodu.

    Prague, Czech Republic
  • Trusted Seller
    2015 AXA VCC 1200

    2015 AXA VCC 1200

    • Manufacturer: AXA
    • Model: VCC 1200

    Obráběcí centrum VCC 1200 s řídícím systémem Heidenhain iTNC 530 je v dobrém technickém stavu. Po dohodě možné vidět v chodu.

    Prague, Czech Republic
  • Trusted Seller
    2012 AXA DBZ

    2012 AXA DBZ

    • Manufacturer: AXA
    • Model: DBZ

    This 5-axis AXA DBZ vertical machining center was manufactured in 2012. It features a Heidenhain iTNC 530 system, a spindle speed of 10,000 rpm, and a tool magazine with 22 positions. The machine includes a swive...

    Czechia
  • Trusted Seller
    2012 AXA DBZ

    2012 AXA DBZ

    • Manufacturer: AXA
    • Model: DBZ

    Equipment: Rotary table Control system: HEIDENHAIN iTNC 530 | Hours on: 28279 h | Number of stack positions: 22 pcs | Number of axis: 5 pcs | Maximum rotary speed of the spindle: 10000 1/min | X-axis travels: 750...

    Brno, Czech Republic
  • Trusted Seller
    Vertical machining centre AXA VSC

    Vertical machining centre AXA VSC 3-XTS – 4 axis – Siemens Sinumerik

    • Manufacturer: AXA
    • Model: VSC 3

    Spindle SK 50 56kw 355Nm X axis = 5800mm Y axis = 900mm 4 axis = 300mm 52 tools internal cooling 30 bar tables have hydraulic clamps

    Prague, Czech Republic
  • Trusted Seller
    2014 AXA VHC3-XTS

    2014 AXA VHC3-XTS

    • Manufacturer: AXA
    • Model: VHC3-XTS

    Equipment: C axis - integrated NC rotary table with a diameter of 800 mm Axis B - spindle tilt /- 100° Divider to divide the workspace Probe Vice

    Brno, Czech Republic
  • Trusted Seller
    AXA VHC3-XTS I Vertical Machining

    AXA VHC3-XTS I Vertical Machining Center I 2014

    • Manufacturer: AXA
    • Model: VHC3-XTS

    We hereby offer this used AXA VHC3-XTS vertical machining center from 2014, located in Czech Republic. It is equipped with a Heidenhain iTNC530 control unit, known for its advanced programming capabilities and op...

    Czechia
  • 2015 AXA VHC 2- 3000

    2015 AXA VHC 2- 3000 XTS

    • Manufacturer: AXA

    X-axis: 3000 mm Y-axis: 600 mm Z-axis: 800 mm Clamping cone: SK 40 Number of tools: 36 pcs Spindle speed: 30 - 10,000 rpm C-axis, rotary table: 630 mm B-axis, spindle tilt: + / - 100% High-pressure spindle coolin...

    Sedliště, Czech Republic
  • 2000 AXA VSC 1 -

    2000 AXA VSC 1 - M CNC

    • Manufacturer: AXA
    • Model: VSC 1

    Table clamping width: 500mm Table clamping length: 3000 mm Spindle taper: SK 40 Spindle speed: 4000 rpm The machine is in good technical condition, connected under power, possible to test it. Heidenhain 430M, too...

    Sedliště, Czech Republic
  • Trusted Seller
    2000 AXA - CNC Stroje

    2000 AXA - CNC Stroje s.r.o. VSC-1-3000-M

    • Manufacturer: AXA
    • Model: VSC 1

    The machine is in good technical condition. Possible to test under power.

    Brno, Czech Republic
  • Trusted Seller
    2009 AXA - CNC Stroje

    2009 AXA - CNC Stroje s.r.o. VSC 1-M

    • Manufacturer: AXA
    • Model: VSC 1

    The machine is in good technical condition, under power, after agreement is possible to test it. Accessories: external belt filter device chip conveyor electric handwheel HR 410 Heidenhain workspace covers two ha...

    Brno, Czech Republic
  • no-image_en.png

    2012 AXA VCC 1200

    • Manufacturer: AXA
    • Model: VCC 1200

    Table dimensions: 1350x500 mm X-axis: 1200 mm Y axis: 600 mm Z-axis: 700 mm Clamping cone: HSK 63 Number of tools: 22 pcs Spindle speed: 12000 rpm. The machine is in a good technical condition, inspection under p...

    Sedliště, Czech Republic
  • Trusted Seller
    2012 AXA DBZ

    2012 AXA DBZ

    • Manufacturer: AXA
    • Model: DBZ

    CNC double machining center 3 axis and 5 axis workstation Type: DBZ Manufacturer: AXA Year: 2012 Control: Heidenhain iTNC 530 X: 750 mm Y: 500 mm Z: 600 mm Max spindle speed: 10000 rpm Tool magazine: 22...

    Czechia
  • 2007 Continuous drill AXA DZ-14DR

    2007 Continuous drill AXA DZ-14DR

    • Manufacturer: AXA

    The DZ-14DR divider is a machine designed for processing cross-section doughs. The dividing process is based on the principle of a suction piston, which is gentle on the dough and leaves its properties intact. Ma...

    Ústín, Czech Republic
  • no-image_en.png

    AXA VSC 1 Machining Center

    • Manufacturer: AXA
    • Model: VSC 1

    Good condition AXA VSC 1 Machining Centers available between 2000 and 2002 years. Located in Italy and other countries. Click request price for more information.

    Italy
  • no-image_en.png

    AXA VSC 3 Machining Center

    • Manufacturer: AXA
    • Model: VSC 3

    Good condition AXA VSC 3 Machining Centers manufactured in 2004. Located in Italy and other countries. Click request price for more information.

    Italy
12