Used Wire Machinery

FASTENER ENGINEERS DTM-03-20

• Manufacturer: Fastener Engineers

Capstan diameter: 20" | Motor: 2 HP

WAFIOS N5

• Manufacturer: Wafios
• Model: N5

Nail diameter: .086" - .149" | Nail length: .511" - 3.937" | Production: 430 PPM | Electrics: AC Motor & Controls | Approx. weight: 6500 lbs | Equipped with: Check out our full inventory

NILSON V-187

• Manufacturer: Nilson

Diameter: Maximum .187" | Standard feed length: Maximum 15' | Motor: 2 HP | Equipped with: Re-Built 1999Maximum Stock Width: 1.250"Stroke of Top Slide: 2.50"Stroke of Side Slides:  2.50"Stroke of Bottom Slide:  ...

2007 MARSILLI WM-2002/8-100 8-Spindle Coil

• Manufacturer: Marsilli

Marsilli Model WM-2002/8-100 8-Spindle Coil Winding Machine (1996 / 2007) Present electrical arrangement 3 Phase, 50/60-Cycle, 208/220/240/380/480V (via integrated multi-tap transformer) Additional features: Pneu...

LUBOW AR-250

• Manufacturer: Lubow
• Model: AR-250

Wire diameter range: Up to 1/4" Diameter | Ring diameter: 1" Min. Outside Dia. x 36" Outside Dia. Max. | Output: Up to 150 Cuts Per Minute | Feed accuracy: Plus or Minus .005" Per 12" Wire Length | Approx. floor...

National 750

• Manufacturer: National
• Model: 750

Maximum cutoff diameter (mild steel): 7/8" | Maximum cutoff diameter (alloy steel): 3/4" | Punch knockout stroke: 4" | Maximum cutoff length: 3/8" | Forging load: 300 Tons | Production: 60 - 80 | Approx. weight:...

VAUGHN 10

• Manufacturer: VAUGHN

Used 25" VAUGHN Wire Drawing Bullblock (model 10). Known for its capabilities in wire machinery, this Bullblock carries stock #14227. Please note, specifications are subject to revisions and buyers verification. ...

HERBORN TF111C/13

• Manufacturer: HERBORN

0.040" (1.016mm) HERBORN MODEL TF111/13 FINE WIRE DRAWING MACHINE (11858) MACHINE #11858 HERBORN #TF111C/13 FINE DRAWING MACHINE 13 DIE 2 ALUMINUM OXIDE CERAMIC CONE BLOCKS 6 STEPS EACH. HORIZONTAL COILER BLOCK C...

RUESCH 12" SINDLE DIE BULL BLOCK (14578)

• Manufacturer: Ruesch

TORIN W11A SPRING COILER (14481)

• Manufacturer: TORIN

TORIN W11A Spring Coiler, used wire machinery. Features double diameter/pitch, 2-plane straightener; accommodates wire dia. .015-.072 in., coil O.D. 3x wire dia. Speed: 20-200 SPM, 300 ft/min. Stock #14481 TORIN ...

SCHUSTER 3AVE #78660

• Manufacturer: SCHUSTER
• Wire diameter: 2,129 millimeter

SPECIFICATIONS: EQUIPPED WITH: TOOLING FOR 2 WIRE SIZES 4 SETS OF GREY IRON ARBOR DIES EIGHT ROLL PRELIMINARY STRAIGHTENING HOUSING BEFORE THE ARBOR FOUR ROLL FEED AFTER THE ARBOR ELECTRICALLY CONTROLLED TRIPPING...

OMCG TR-10

• Manufacturer: OMCG
• Wire diameter: 6 millimeter

Equipped With Mechanical feeding (infeed): 0 - 200 mm (8 in) | Wire diameter: 6 mm (0.236") | Strip width: 50 mm (1 968") | Press: 10 t

HYODONG Nut Parts Former

• Manufacturer: HYODONG

Equipped With Specifications: Features: EXAMPLES OF TECHNOLOGY OPTIONS: 1) Built-in Robot tool change system A built-in tool change system for quick die change with better compact design. The die block and punch ...

National 750-6

• Manufacturer: National
• Model: 750-6

Maximum cutoff diameter-alloy: .875 inches | Maximum cutoff diameter-mild: .750 inches | Maximum kickout length: 4 inches | Minimum kickout length: .500 inches | Max output speed: 40-70ppm | Main motor: 50 hp | ...