Used Slitters & Slitting Lines

Trumpf TruTool F 125

• Manufacturer: Trumpf
• Model: F 125

Call for Status and Pricing The TruTool F 125 closes angle and standing seams with a spring-loaded hammer. This gives you tightly closed seams with consistent quality, even with variations in sheet thickness. The...

Trumpf TruTool C 250 with chip clipper

• Manufacturer: Trumpf
• Model: TruTool

Call for Status and Pricing The TruTool C 250 provides unmatchable performance. It cuts sheet thicknesses of 0.1 in. in mild steel and 0.06 in. in stainless steel. It offers a unique added benefit in the form of ...

Trumpf TruTool C 160 with chip clipper

• Manufacturer: Trumpf
• Model: TruTool C 160

Call for Status and Pricing The TruTool C 160 with integrated chip clipper for two-handed operation is ideal for notching and interior cutouts up to 0.06 inches in mild steel and 0.05 inches in stainless steel. I...

Manual Rotary Shear Metal Slitting Slitter Cut Flat Sheet Strips

• Manufacturer: McWilliams Mfg. Company

This is a Manual Rotary Shear Metal Slitting Slitter Cut Flat Sheet Strips... Tested and working well! PTWS # LR-000000-06182022=LR-09 Picture# 06102022 Bid with Confidence on this item, check our feedback!!! ...

83" ARROW MODEL 2000 CENTER SURFACE WITH CENTER ASSIST: 70" REWIND DIAMETER

• Manufacturer: Arrow
• Model: 2000

One (1) 83" Arrow Model 2000 Simplex surface center assist rewind slitter rewinder with constant surface winding. Still installed and running. Schedule inspection through Global Equipment Intl., LLC Surface / cen...

JAGENBERG VARI - DUR 88.5" SLITTER REWINDER 60" REWIND

• Manufacturer: Jagenberg
• Model: VARI-DUR

109755 Used Jagenberg Vari-Dur 88 .5" two drum slitter rewinder, 60" rewind diameter , shaft less floor pick up unwind stand.

STANFORD 142LT

• Manufacturer: Stanford

Used 24" Wide Stanford Roll Doctor Machine. Model 142LT, serial #4864630. Unwind/Rewind good for 24" diameter rolls. Maximum roll weight 250 lbs. Maximum 1200 feet per minute. Drive by a 5 hp motor with speed con...

24" WIDE NEW SRC SYSTEMS LTD MODEL 6100 REVERSIBLE DOCTOR MACHINE 40" DIAMETERS

• Manufacturer: SRC SYSTEMS LTD.

200202 One (1) New SRC Systems Model 6100 Reversible Doctor Machine - Stock Machine Lead time: Ready to ship out of the UK Unwind/Rewind type: Cantilevered (supports during winding) Unwind/Rewind maximum roll dia...

26" WIDE DUSENBERY MODEL 633 AC 15" REWIND DIAMETER

• Manufacturer: Dusenbery

One (1) Used 26" Wide Dusenbery Model 633 AC For slitting plastic films, off caliper paper, tape, plastic films, foils & laminates 26" Wide web path 24" Unwind diameter 15" Rewind diameter 300 fpm Minimum slit wi...

20 Ga. X 24" Wilder 2024

Used Slitter Capacity: 20 | Weight approx. (lbs.): 280 | Electrics: 1/3 HP, 115 Volt | Throat depth: 24in (Open End) | Minimum slitting width: 1-1/4in | Feed direction: Left to Right | Slitting speed: 90 FPM

2001 KAMPF RKW-1003

• Manufacturer: Kampf
• Model: RKW-1003

SPECIFICATIONS Manufacture - Kampf - Model RKW-1003 - New 2001 Entry Strip Width - 25" min to 69" max (635 - 1753mm) Strip Thickness - .002 - .015" (0.05 - 0.381mm) - NOTE: Kampf says that with minor knife mod...

51" SRC SYSTEMS 1300 DOCTOR REVERSIBLE REWINDER - STOCK MACHINE - 4 WEEK LEAD TIME

• Manufacturer: SRC SYSTEMS LTD.

One (1) New SRC Systems Ltd. Model 1300 Reversible Rewinder Lead time appx 4 weeks until delivery to USA Maximum working width: 51" Maximum roll diameter: 40” Shafltess floor pickup unwind Unwind/Rewind shaft siz...

42" WIDE ARROW MODEL 325-6 DUPLEX SLITTER

• Manufacturer: Arrow

107916 One (1) Used 42" Wide Arrow Model 325-6 Duplex Slitter Rewinder Machine is still running Max material width: 42" Unwind diameter: 36" Fife edge guide Rewind diameters: 18" Currently set up with 20 shear kn...

63" (1600mm) TITAN SR6 DUPLEX WITH PERFORATOR & TRIM WINDER

• Manufacturer: Titan

109692 One (1) Used 63" Titan SR6 40" (1000mm) unwind diameter (Shaftless floor pickup for 3+6" cores) 24" (600mm) rewind diameter (full width differential ball lock collars at 25mm each) Splice Table Anti static...