Used Sanders

Sunhill ShengShing SDM-15 Open End 15″ Wide Belt Sander

This Sunhill ShengShing SDM-15 15″ wide belt sander has a 15″ width capacity. Since it is open ended you can do up to 30″. 6″ thickness capacity. The 8″ drum is 65 durometer and is powered by a 220V/3-Phase 5 hp ...

Ritter R25814 14″ Tall Oscillating Edge Sander

• Manufacturer: Ritter

Ritter bills this as a CR25814 DRAWER BOX SANDER…….the reality is that it has 16″ X 56″ platens not only makes it a drawer box sander, it makes it a tall flexible sander that also oscillates. 10 HP Abrasive Belt ...

Viet SI-321-2200 (43") 3-Head Wide Belt Sander

• Manufacturer: Viet

Used Viet SI-321-2200 (43") 3-Head Wide Belt Sander 43" x Approximately 6" 20" load space Variable speed feed LED read-out for feed speed Load meters Pneumatic belt tracking and belt tensioning Auto thickness con...

Laguna MW37 Pro Metal Wide Belt Sander

• Manufacturer: Lagun

Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 20HP motor, 37″ wide work table, and an auto-height adjustm...

Laguna MWW51 Pro Metal Wide Belt Sander

• Manufacturer: Lagun

Offering metal deburring, sanding, and texturing, the Pro Line of Metal Wide Belt Sanders from LAGUNA gives a new level of production perfection. With a 30HP motor, 51″ wide work table, and an auto-height adjustm...

Ritter R258 Oscillating Universal Edge Belt Sander

• Manufacturer: Ritter

7.5 HP Abrasive Belt Drive Motor, TEFC 1 HP Oscillating Dive Motor 8″ X 144″ Abrasive Belt Size 10″ X 56″ Phenolic Platen 6-Way Adjusting Front Table Steel Tilting End Table Raising and Lowering Device Form Block...

Oliver 6″ x 89″ Non-Oscillating Edge Sander – 6305

Can be used with the belt in the horizontal or vertical position or any angle in between. Precision ground steel platen is graphite covered to reduce heat. Cast iron table is vertically adjustable allowing full u...

Wysong & Miles NO. 303 Combination Disk and Oscillating Spindle Sander

• Manufacturer: Wysong

This machine is two in one. It features a 26″ disk sander with a 15″ X 34″ titling table (to 45 degrees) on one side. On the other you will find an oscillating spindle sander featuring a 24″ X 24″ tilting table (...

Oliver 6″ x 89″ Oscillating Edge Sander – 6303

6” x 89” belt features oscillation action for a superior finish. Belt operates at any angle between horizontal and vertical. Easy belt changing and tracking adjustments. Steel platen is graphite covered for reduc...