Used Pumps in Hiroshima, Japan

［EBARA] Pumps

• Manufacturer: Ebara

Unused. Power: 1.5Kw200V | Material: Wetted part SUS | Quantity saved: One

Tube pump No model

Motor: 0.4kw/200v geared motor Tube diameter: φ30 Rotation diameter: φ140 Rotation speed: 100/120rpm 50/60Hz Remarks: No tube

［SEEPEX］ Morno pump No model

• Manufacturer: Seepex

Connection 125A, rotor 80φ There is a status reserve

［Izumi Food] Sanitary pump

• Manufacturer: イズミフード

Power: 0.75 kw (estimated) | Material: Main section SUS | Quantity saved: 3 units

［NIKKISO] Non-Seal Pump

• Manufacturer: 日機装

Purchasing area: 60Hz | Quantity saved: 1

Maruhachi Pump Manufacturing NHGH-4

• Manufacturer: 丸八ポンプ製作所

Discharge volume: 66L/min Discharge pressure: 10Kg/cm2 Rotation speed 1200rpm

Maruhachi Pump Manufactory KT - 10

• Manufacturer: 丸八ポンプ製作所

Discharge rate: 20 L / min Discharge pressure: 6 kg / cm 3 Rotation speed: 500 rpm

［Kameshima Iron Works] Pump No model

• Manufacturer: 亀嶋鐵工所

Motor: 0.75kw Gear pump Purchasing area: 60Hz | Quantity saved: 1

Pump N4J5B

Mohno pump Motor: 0.75 kw / 4 p Material: Rotor SS, Casing SS

Maruhachi pump KSH-27M

• Manufacturer: 丸八ポンプ

Motor: 3.7kw, SUS wetted parts Discharge volume: 40L/min Head: 80m

［Sanitary pump, unused, no model

• Manufacturer: 岩井機械

Material: Wetted part SUS | Quantity saved: １

2007 Mitsuwa Pump Works 3SM (S) -LB

• Manufacturer: みつわポンプ製作所

Caliber: 80 x 80 Pumping capacity: 0.88 m3 / min Total head: 8m Shaft sealing method: Double mechanical seal With materials

2007 Mitsuwa Pump Works 3SM (S) -LB

• Manufacturer: みつわポンプ製作所

Caliber: 80 x 80 Pumping capacity: 0.68 m3 / min Total head: 11m Shaft sealing method: Double mechanical seal With materials

［Heishin + Mondomix] Morno pump (with de-aerator)

• Manufacturer: Mondomix

Small size at test equipment level Power: 0.3Kw | Purchasing area: 60Hz | Quantity saved: １

1998 Mitsuwa Pump Manufacturing Co. 2.5SMC-MB

• Manufacturer: みつわポンプ製作所

Pump part only (motor missing) Bore: 65 Lifting capacity: 0.34 m3/m Head: 30 m