Used Processing in New Zealand

Rotary Sieve

Rotary Sieve, stainless steel, 3 ph, start/stop/e-stop controls, bag dump station with dust hood (can connect dust collector hose) and auger infeed, safety grate, inspection door on drum, pneumatic seal on bearin...

Carton Machine

CHENGXIANG Carton Machine, single phase, pneumatic, production speed up to 50 cartons/min, designed to build a box, fold a pamphlet for each box, put a bottle and the pamphlet in the box, and close the box. Size ...

Printed Electronics Dryer

Adphos NIRLAB is a turn-key (Infra red) drying and curing system for research and development or prototype production of printed electronics with inks applied via flexographic, screen, gravure or inkjet printing....

2009 Encapsulator

• Manufacturer: MG2

MG2 Planeta 100 Encapsulator, made in Italy, YOM 2009, 3 ph, 14kw, up to 100,000 capsules/hr, with tooling for capsule size 3, fitted with 2 x powder low dosage units, suitable for dosing powder for inhalation. M...

Air Compressor

JUBA Oil Free Air Compressor, 3 ph, on wheels, start/stop controls, 6kw, 1380rpm, 0.7MPa, 520L/min, 160L built in air receiver. Approx. 1350mm x 360mm x 850mm H.

Conveyor - Belt

Belt Conveyor, inclined, single phase, no lead or plug, green belt, belt could do with being replaced, stainless steel frame. Infeed ht 560mm, outfeed ht 900mm, belt – 283mm W x 2990mm L.

2007 Ice Maker

Beluga BT10000 Slurry Ice Maker, YOM 2007, design pressure 1.56MPa, design temperature -30/+35 degrees Celsius.

2017 Tray Packer (auto)

END320 Tray Packer (Auto), YOM 2017, 3 ph, 32 amp plug, pneumatic (100+cfm air supply preferred), current tooling does 4 trays per cycle and has 2 cavities for the goods, approximately 40-50 trays per minute, hot...

Air Handling Unit

• Manufacturer: Temperzone

Temperzone Clever AHU MC100 Air Handling Unit, with condenser, heat pump controller and ducting (if required). Owner will keep VSD as this operates other equipment as well. Approx. 2 years old, serviced every 3 m...

Labeller

KOSME Labeller, wet gum unit, 2 head, for front and back labelling, previously used to label Champagne bottles, last used approx. 2 years ago. Needs some work to put it back together.

Tank - S/S - 1000L

Truscott Stainless Steel Tank, enclosed, single skin, side manhole, stirrer, internal element (condition of element unknown), central bottom outlet – 35mm, o’all dims approx. 1300mm x 1350mm x 2170mm H. Approx. 1...

2014 Air Compressor and Dryer

Atlas Copco GA30+ Air Compressor and Pneumatech AD360 Dryer, Compressor is YOM 2014, MAWP 7.5bar, 3 ph, 30kw, 210cfm, Dryer is YOM 2018, MAWP 13bar, 3 ph, R410A refrigerant. Compressor dims 1800mm x 1050mm x 1810...

Flow Wrapper

Fuji FW-341 Horizontal Flow Wrapper, approx. 1980’s machine, 3 phase, o’all dims approx. 4350mm L x 1100mm W, infeed height 850mm, was previously wrapping pies at 70 per minute, last used around July 2023. Chain ...

2013 Ink Jet Printer

Leibinger JET 3 + Ink Jet Printer, YOM 2013, made in Germany, single phase, touch screen controls, stand for printing head, black ink, used to print expiry dates, batch codes etc. onto packaged products.

2010 Air Compressor

Atlas Copco GA15 VSD FF Screw Air Compressor, YOM 2010, 3 ph, 15kw, 510-2250L/min, max pressure 12.75 bar, built in 270L air receiver, 91757 hours, serviced regularly.