Used Processing in New Jersey, USA

CORNELL D26 Versator Deaerator / Defoamer

• Manufacturer: Cornell

Cornell Versator model D-26 Deaerator / Defoamer. Stainless Steel contact parts. Driven by 25 HP, 230/460 v, 1770 RPM Mounted on Stainless Steel base with 7.5 HP Busch Vacuum Pump model LT 0170 and (2) Teco Cont...

Stainless Steel 304 Batch-Type Agitated Reactor - IPP# 207282

• Manufacturer: Process Systems ltd

Jacketed Pressure/Vacuum Reactor with Mixer Jacket rated MAWP for 100 psi @ 338 degrees F., MDMT for -20 degrees F @ 100 psi Vessel has two zone half pipe coil jacket Mixer was a double-motion agitator with scrap...

1968 Brighton FDWV-50510-BJD

• Manufacturer: Brighton

Brighton Vertical Dimple Jacketed Reactor Brighton, 1,000 Gallons Capacity, 182 PSI @ 350°F Jacket Pressure, 200/FV @ 350°F Internal Pressure, Top/Center-Mounted Pfaudler Agitator, 316-L Stainless Steel, Mounted ...

GEA EcoCut 225

• Manufacturer: GEA

2021 GEA EcoCut 225 Emulsifier with capacity for 14,000-20,000 lbs/hr of product, depending on product viscosity. S/N: E011100105025. Equipment meets American Meat Institute (AMI) hygienic standards. The EcoCut d...

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246699

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Batch-Type Agitated Reactor 34,069 L (9,000 gallons) Stainless Steel 316 - IPP# 246701

• Manufacturer: Industrial Alloy Fabricators

There are no man way covers for this vessel. Instead, this process required a ring and a single use rupture disk.

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221215

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor`

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221214

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) Requires 2.6 gpm cooling water Direct driven by ac motor

IPP# 602135, Solid State Polymerization Plant Polymers - Fibres and Plastics

70 TPD PET - SSP Plant It is a facility that manufactures high-IV PET chips suitable for various bottle production by reacting low-IV PET chips produced in a melt polymerization process in a solid state to have h...

Pump-Vacuum 779.8 m3/h (459 CFM) Carbon Steel - IPP# 221283

• Manufacturer: Kinney/Tuthill

screw type dry seal vacuum pump manufactured by Kinney/Tuthill 0.05 ultimate pressure No oil or water with process contact and quiet operation less than 85 dB(A) 4" suction flange, 2" discharge flange. Requires 2...

Mixer-Disperser 14.7 kW (19.7 HP) Stainless Steel 316 - IPP# 212576

• Manufacturer: Fryma

vacuum processing vessel with Homogeniser internal pressure 95% vacuum 500 liter batch 316 stainless steel jacketed vessel top cover with a duplicated slow speed agitator with (2) saw tooth blade impellors (1) ho...

Cytiva 6098 Column - IPP# 239339

• Manufacturer: Cytiva

2000 Liter/Hr., 316 SS, polished to 180 grit finish, modular chromatography system, manufactured by Cytiva/GE- ATKA system # 6098 6 inlets, 4 outlets, two column connection, five head diagram pumps. Rated for 6 b...

- IPP# 211968

• Manufacturer: Airoil-Flaregas

Airoil-Flaregas F.C.10 flare tip, Pilots Derrick supported Flare stack, Customer ref #62/3336085/2H1/ON, The FC.10 flare tip inclusive of the Flarex molecular seal, Derrick supported flare stack and Knock out dru...

Major Items Plastic Stainless Steel 316 - IPP# 205765

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Melt temp...

Major Items Plastic Stainless Steel 316 - IPP# 205766

• Manufacturer: Rieter (Maag)

Type: Underwater strand pelletizer cutter the vertical design provides space savings and easy access to the cutter head Designed to Process the following PET: Melt density 1.18 g/cm3, Solid density 1.34 g/cm3. Me...