Used Processing in Missouri, USA

7.5 HP STERLING MODEL 7075 AIR BLOWER; S/N 66728 - Located At 314 Madison Street, Scott City, MO

• Manufacturer: Sterling

7.5 HP STERLING MODEL 7075 AIR BLOWER; S/N 66728 - Located At 314 Madison Street, Scott City, MO 63780

7.5 HP GF PUHL MODEL 209059R AIR BLOWER; S/N 0704105G (NEW 2-6-2007) - Located At 314 Madison

7.5 HP GF PUHL MODEL 209059R AIR BLOWER; S/N 0704105G (NEW 2-6-2007) - Located At 314 Madison Street, Scott City, MO 63780

24" WIDE X 110' LONG NEW 2-PLY CR80 POLYURETHANE X BARE CONVEYOR BELT WITH FASTENERS - Located At

24" WIDE X 110' LONG NEW 2-PLY CR80 POLYURETHANE X BARE CONVEYOR BELT WITH FASTENERS - Located At 315 Madison Street, Scott City, MO 63780

36" WIDE X 1/2" THICK USED RUBBER CONVEYOR BELT - Located At 315 Madison Street, Scott City, MO

36" WIDE X 1/2" THICK USED RUBBER CONVEYOR BELT - Located At 315 Madison Street, Scott City, MO 63780

2 HP NAPA MODEL 824256VAT VERTICAL TANK AIR COMPRESSOR; S/N 8090254221 (NEW F-2016), 115 VOLT,

2 HP NAPA MODEL 824256VAT VERTICAL TANK AIR COMPRESSOR; S/N 8090254221 (NEW F-2016), 115 VOLT, SINGLE PHASE, WITH HOSE REEL AND AIR GUN - Located At 314 Madison Street, Scott City, MO 63780

25 HP PACEMAKER R70AHU 4-CYLINDER HORIZONTAL TANK AIR COMPRESSOR; S/N 37215 - Located At 315 Madison

25 HP PACEMAKER R70AHU 4-CYLINDER HORIZONTAL TANK AIR COMPRESSOR; S/N 37215 - Located At 315 Madison Street, Scott City, MO 63780

2004 FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. 510140

• Manufacturer: Furukawa

(2004) FURUKAWA 1200ED w/ 12,764 FRAME HRS (REMAN @ 6874HRS) & 6046 IMPACT HRS. (2004) Furukawa 1200ED with 12,764 frame hours (Re-man engine @6874 hrs) and 6046 impact hrs (resealed @ 5724hrs). 5.9 Cummins engin...

2002 TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS 510136

• Manufacturer: Tamrock

(2002) TAMROCK 700-2 HYDRAULIC DRILL WITH 6876 HRS & 2981 IMPACT HRS (2002) Tamrock 700-2 hydraulic drill with 6876 hrs on Cat 3126 engine and 2981 impact hours. Set up for T45 steel with rod changer. Overall, go...

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR 162013

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 50′ TRUSS CONVEYOR Shopbuilt 30″x50′ truss conveyor with 3x3x1/4 main cord & 2x2x1/4 lattice. 45 degree idlers, 2-ply belt, lagged head pulley, wing-tip tail pulley, & gearbox (no motor). Good con...

JOY MS-2A 530020

• Manufacturer: Joy

Year: MS-2A air track drill with Joy VCR360 hammer, square boom, operator noise sheild, and operator controls. Includes dust collector, but not installed. Drill is ready for work.

BARBER-GREENE 30″ X 42 162009

• Manufacturer: Barber Greene

Year: 3 sets of legs and 20″ OD wing tail pulley. Conveyor has 20 degree Marco idlers and Dodge TD-7 gearbox and electric motor. Wiring and starters included. Good condition.

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR 162012

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 80′ TRUSS CONVEYOR Shopbuilt 30″x80′ truss conveyor with 3″x5″ main cord & 3″x3″x1/4″ lattice. Has a 24″ 2-ply belt, gear box, but no motor. Wing tip tail pulley & lagged head pulley. 35 degree se...

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR 163074

• Manufacturer: Shopbuilt

SHOPBUILT 30″ X 16′ CHANNEL CONVEYOR Shopbuilt 30″x16′ channel conveyor with 35 degree idlers, 5″ cans, & 2-ply belt (good). Has gearbox, but no motor. Good condition.

Votator 6x72

• Manufacturer: Votator

Cherry Burrell Votator Scraped Surface Heat Exchanger 6x72 single barrel - Shown As Is but we can recondition if needed. S/N 3455353. Direct Driven by 20HP motor, 1755 rpm/230 rpm out. All wetted surfaces are ...

Filter Bag

Filter bags for polish filter, size #2. There are 6 boxes of 25 bags each. P2S Polyester Felt Filter Bag. Bags measure 2 ft 5 in long. Priced for the LOT.