Used Processing in Louisiana, USA

Trusted Seller
SIG Model BLOWPAC 4/6-1000D FGT Continuous Extrusion Blow Molding Machine
SIG Model BLOWPAC 4/6-1000D FGT Continuous Extrusion Blow Molding Machine Year of manufacture- 2001 70 100 00 200 Press arrangement- dual sided In machine trimming capability Clamp width- 500 mm Clamp height- 375...
Harvey, LA
Trusted Seller
Uniloy 6 Head Manifold
- Manufacturer: Uniloy
Uniloy 6 Head Manifold Distance between head centers- 8″ Condition- Excellent, like new Note- Screw and Barrel shown in images attached are available at an additional cost IPC offers Uniloy Reciprocating Screw Bl...
Harvey, LA
Trusted Seller
Hydraulic Pump with Motor and Tank used on a Uniloy Model 350 R2 Blow Molding Machine
- Manufacturer: Uniloy
Hydraulic Pump with Motor and Tank Motor horse power- 30 System was removed from a Uniloy Model 350 R2 Blow Molding Machine that was rebuilt and never used in production Condition- Like New IPC offer Uniloy Recip...
Harvey, LA
Trusted Seller
Sidel SBO 6 PET Preform Hopper and Elevator
- Manufacturer: Sidel
- Model: SBO 6
Sidel SBO 6 PET Preform Hopper and Elevator Previously used to store, and elevate PET preforms (was installed with a Sidel Model SBO 6 Blow Molding Machine) Hopper dimensions 62″wide x 75″ long x 34″deep (this me...
Harvey, LA
Trusted Seller
Conair Model AL-2 Vacuum Loader
- Manufacturer: Conair
Conair Model AL-2 Vacuum Loader Loader volume- 0.2 Loader body diameter- 8 inches Loader maximum temperature- Vacuum motor- 5/8 horse power, 2 brush Nominal throughput- up to 200 pounds per hour
Harvey, LA
Trusted Seller
2000 Davis-Standard/Sterling Controls
- Manufacturer: Davis-Standard
2000 Davis-Standard/Sterling Controls Sequencing and heat controls Barber Colman Model Maco 6500 PLC with 1200 point parison programming Condition- Good
Harvey, LA
Trusted Seller
Netstal Model S-800-230 80 Ton Injection Molding Machine
- Manufacturer: Netstal
Netstal Model S-800-230 80 Ton Injection Molding Machine Year of manufacture- 1999 Shot size- 4.16 ounces Clamp force- 80 tons Toggle or hydraulic clamp open/close mechanism- hydraulic Distance between tie bars- ...
Harvey, LA
Trusted Seller
Cincinnati Milacron Model VT165-13 165 Ton Injection Molding Machine
- Manufacturer: Cincinnati
Cincinnati Milacron Model VT165-13 165 Ton Injection Molding Machine Year of manufacture- 1993 Serial numbers- 4036A61/93-17 Type clamp- hydraulic Clamp force- 165 tons Platen size- 26″ x 26 ” Distance between ti...
Harvey, LA
Trusted Seller
Worthington Cylinders A-11221
- Manufacturer: Worthington
w/VVCP Bore size: 6.00" | Stroke: 6.00" | Mawp: 1800
Shreveport, LA
Trusted Seller
Worthington Cylinders A-11222
- Manufacturer: Worthington
w/VVCP Bore size: 6.00" | Stroke: 6.00" | Mawp: 1800
Shreveport, LA
Trusted Seller
Worthington OF6M-4 Compressor Frames N/A
- Manufacturer: Worthington
6" Stroke, 1000 RPM, RL: 30,000# Stroke: 6.00" | Rod load: 30,000 | Rpm: 1,000
Shreveport, LA
Trusted Seller
Worthington Cylinders A-11335
- Manufacturer: Worthington
w/VVCP Bore size: 6.00" | Stroke: 6.00" | Mawp: 1800
Shreveport, LA
Trusted Seller
Worthington Cylinders A-11896
- Manufacturer: Worthington
w/VVCP Bore size: 6.00" | Stroke: 6.00" | Mawp: 1800
Shreveport, LA
Trusted Seller
Worthington OF6M-4 Compressor Frames A-11648
- Manufacturer: Worthington
6" Stroke, 1000 RPM, RL: 30,000# Stroke: 6.00" | Rod load: 30,000 | Rpm: 1,000
Shreveport, LA
Trusted Seller
2014 TRane CGAM100
- Manufacturer: Trane
Equipment condition: Great condition | Voltage and phase: 460 Volt 3 Phase | Compressor type: Scroll | Condenser type: Air-cooled
Denham Springs, LA