Used Processing in Île-de-France, France

Economiser

• Manufacturer: Babcock Wanson

Calculating your Capital Gain Babcock Wanson economisers can be designed to work with both fixed and interruptible natural gas supplies thereby removing the need for costly and often complex exhaust gas bypass sy...

EPC-ES Series

High Efficiency Thermal Fluid Heating Integral double pass combustion air/exhaust gas economiser ensures very high operating efficiency without the need for external heat recovery – simple, safe and reliable in o...

2004 KALLFASS SUPER WRAP 650 DLIL FILM WRAPPING MACHINE #43

• Manufacturer: Kallfass

SUPER WRAP 650 DLIL FILM WRAPPING MACHINE

Thermal Deaeration

Pressurised Thermal Deaerator A pressurised thermal deaerator, operating at circa 0.3 barg allows the temperature of the water to be raised to around 105°C making it possible to obtain water of excellent quality ...

Modulo+

• Manufacturer: Babcock Wanson

Modulo+ Gas Burners Fuel available: Natural gas, Liquefied gas From 6 to 20 MW Turn down ratio 1 to 12. Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676). Minimum excess air over the entire opera...

LNTA & TA

• Manufacturer: Babcock Wanson

LNTA & TA Industrial Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request. LNTA: From 3.5 to 10.5 MW. TA: from 9 to 22 MW. LNTA: Fully integra...

Air Preheating R-Eco

• Manufacturer: Babcock Wanson

Principle of operation: Exhaust Gas Combustion Air Preheating Economiser The benefits of "R-ECO" installation are most apparent where there is greater than 90% condensate return. As returning condensate is alread...

REC Series

• Manufacturer: Babcock Wanson

Ideal for producing steam or high temperature water, the REC Series uses combustion gas coming from diesel engines, gas turbines (co-generation), industrial furnaces, incinerators or other thermal equipment. Thes...

TPC-LN Series

Simple Reliable Operation TPC-LN combustion chamber is formed using concentric wound helical coils which form the gas passes. This safe and simple arrangement provides a very generous combustion chamber resulting...

EPC-H Series

High Efficiency The combustion chamber is designed for low thermal load and has a large heat exchange surface resulting in a high thermal efficiency of up to 92%. The heat exchange design also results in optimal ...

TPC-B Series

Simple Reliable Operation TPC-B includes an integral, air-cooled outer case that acts as both a combustion air pre-heater/economiser and as a constant barrier between the hot combustion gases and the outer struct...

ORTHOS

• Manufacturer: Babcock Wanson

ORTHOS Gas Burner Fuel available: Natural Gas, Liquefied Gas From 7 to 22 MW Turn down ratio 1 to 24 Very low NOx operation of ≤ 60mg/Nm³ at 3% O2 (referring to EN676) Minimum excess air over the entire operating...

OPTIMO

• Manufacturer: Babcock Wanson

OPTIMO Forced-Draft Burners Fuel available: Natural gas, Liquefied gas, Gasoil, Medium and Heavy Fuel Oils and other specific fuels on request OPTIMO 1, 2, 3 & 4 cover a large power range: from 700 kW to 12.5 MW ...

2014 ARBURG 400T 820S 4000/1300

• Manufacturer: Arburg
• Model: 820 S

1 blowpipe Type of control: SELOGICA | Number of hours: 31 086 H | Storage place: LA FRANCE | Deadline: MECA PLASTIC | Closing force: 400 T | Opening stroke: 700 mm | Columnar: 820 x 820 mm | Plateaux dimensions:...

2005 JSW 450T EL III 1400 H ELECTRIC

• Manufacturer: JSW

Number of hours: 34 000 H | Deadline: DISPO | Closing force: 450T | Opening stroke: 800 mm | Columnar: 810 x 810 mm | Plateaux dimensions: 1210 x 1210 mm | Mini/maxi mould: 160/420 mm | Max distance between tray...