Used Processing in British Columbia, Canada

CHIP FEEDER ALLIED 42 X 42

• Manufacturer: Allied

- Allied 42" x 42" - rubber tipped feeder - 10 HP gearhead drive - located in Vancouver, BC

Optimil Double Length Infeed - Side Shift and Skew

• Manufacturer: Optimil

- Built in 1999 - 4" to 20" diameter (was set up for 14" diameter) - 8' to 20' length - Base feed speed 300 FPM @ 60 hz - Main frame supported on two (2) roundway slides c/w linear positioners - Twelve (12) holdd...

Comact DDM10 Line

• Manufacturer: Comact

- 10 years old - Approx. 120' V-flite conveyor including drive and attached control devices - Flying log turner - new HD upgrade 2011-12? (Quad roll) - DDM10 full profile machine, 480 volt - All drive units, moto...

16" x 39" Roots High Pressure Blower

• Manufacturer: Roots

- Top in, bottom out - Inlet volume 46005 - Driver and driven poly chain pulleys c/w belt - No motor - Silencer and piping not included

SUTORBILT 713V-4500 BLOWER

- rebuilt

50 HP Low Pressure Blower

- 44" fan - Decent shape - 460 volt - Good for up to 20,000 CFM

Holman Screw Air Compressor

• Manufacturer: Holman

- 150 HP motor, 440 volt, 1770 RPM

20' Hemco Trimmer

• Manufacturer: Hemco

- Board dealer c/w 6 strand 81X, motor & drive - good condition - Trimmer - Left hand, 11 saws, 22" diameter carbide, 7 HP on "0" saw, 5 HP on all others, 11 cylinders, 9 air actuators. Will pass 24 ft board. Inf...

30' Rollcase (Approx.)

• Manufacturer: Canadian Mill Equipment

- Nine (9) 8" diameter x 26" face bedrolls c/w double single chain drive mounted onto a channel frame - No drive unit

8' x 40' Pel-Pro Single Pass Dryer

• Manufacturer: Pel-Pro

- 20 HP drive - ID of burner is 42" - ID of the heater is 54" x 18' long - PEL-PRO 8’ x 40’ Single-pass Drum-dryer c/w Drive unit. All is in good condition - The burner information: GP Combustion Equipment Inc.; ...

Hammer Hog System

- 21" x 36" opening - 250 HP, 1200 RPM, 460 volt motor c/w soft start - Screen has approx. 4" x 2" openings - Six (6) rows of hammers c/w spare set - 24" wide x approx. 16' long belt conveyor c/w MDI metal detect...

PEI Four (4) Canister TCO (New)

• Manufacturer: PEI

Fabricated TCO components - Base hopper sections - Mid sections - Retention chamber components - 72" diameter inlet header duct, approximately 60' - 80" diameter outlet header duct, approximately 60' - 74" diamet...

'V' Flight Scan Conveyor

- Manufactured by SawQuip - Approx. 42' c/c head and tail sprockets - H124 chain c/w flights every 24" - Head shaft assembly (no drive) - Tail shaft assembly

Belt Head & Tail Drum

44' Dynamic Action Vibrating Conveyor

• Manufacturer: Dynamic Action

- Balanced - c/w sheave but no motor - 24" wide (narrows down to 18" at the transition end) - Would require a new transition piece