Used Machine Tools in Switzerland

KUGEL MULLER MPS 2

• Manufacturer: Kugel Muller
• Model: MPS 2

Throwing wheel diameter: 175 mm | Circulary table diameter: 300 mm | Grinding height over table: 245 mm | Grinding spindle speeds: 2560 t/min | Voltage 50 hz 3x: 380 Volt | Machine's weight about: 200 kg | Lengt...

GMN GEORG MÜLLER MPS 2-R 300

• Manufacturer: Muller

Diameter: 175 mm | Width: 900 mm | Bore: 76 mm | Circulary table diameter: 300 mm | Travel of the fine feed: 12 mm | Grinding height over table: 240 mm | Magnetic chuck: 95 mm | From: t/min | Up to: 30 t/min | G...

KUGEL MULLER MPS 2

• Manufacturer: Kugel Muller
• Model: MPS 2

Throwing wheel diameter: 175 mm | Table length: 300 mm | Table width: 160 mm | Length: 700 mm | Width: 500 mm | Grinding length: 400 mm | Grinding height over table: 245 mm | Grinding spindle speeds: 2560 t/min ...

2002 G&N MPS2-R300

• Manufacturer: G&N

Throwing wheel diameter: 175 mm | Circulary table diameter: 160 mm | Grinding height over table: 170 mm | Magnetic chuck: 95 mm | Max. work piece diameter: 300 mm | From: t/min | Up to: 30 t/min | Grinding spind...

2011 PARAGON RIG-150NC

• Manufacturer: PARAGON

Control: HITECH | Min. grinding diameter: 6 mm | Max. grinding diameter: 150 mm | Max. grinding depth: 150 mm | Above the workpiece table: 520 mm | Longitudinal travel (z-axis): 540 mm | Rapid traverse z: 9 m/mi...

DISKUS DD 300 So

• Manufacturer: Diskus

Max. work-piece height: 80 mm | Number of grinding heads: 2 | Outside diameter: 300 mm | Inside diameter: 233 mm | Width / height: 50 mm | From: 1530 t/min | Up to: 24 m/s | Driving plate: 29.6 - 192 mm/s | Volt...

DISKUS DD 400 II CRM

• Manufacturer: Diskus

Max. work-piece height: 80 mm | Grinding width: 40 mm | Outside diameter: 400 mm | Inside diameter: 250 mm | Width / height: 50 mm | From: 135 t/min | Up to: 1435 t/min | Peripheral speed: 3 - 30 m/s | Rotation ...

VOUMARD 3 CNC

• Manufacturer: Voumard

Control: NUM | Min. grinding diameter: 3 mm | Max. grinding diameter: 50 mm | Centre height: 200 mm | Longitudinal travel (z-axis): 300 mm | Cross travel (x-axis): 90 mm | Swivelling range: -5 / 60 ° | From: 550...

2012 STUDER S 41

• Manufacturer: Studer

High-resolution C-axis + Axis B1 + B2 Control: GE FANUC Series 31i-Model A | Centre height: 225 mm | Distance between centres: 1000 mm | Max. work piece diameter: 550 mm | Z axis: 1150 mm | X axis: 350 mm | Diame...

2012 STUDER S41

• Manufacturer: Studer
• Model: S41

High-resolution C-axis + Axis B1 + B2 Control: GE FANUC Series 31i-Model A | Centre height: 275 mm | Max. work piece diameter: 550 mm | Z axis: 1150 mm | X axis: 350 mm | Diameter: 500 mm | Height: 1000 mm | Weig...

2012 STUDER S41

• Manufacturer: Studer
• Model: S41

High-resolution C-axis + Axis B1 + B2 Control: GE FANUC Series 31i-Model A | Centre height: 275 mm | Distance between centres: 1000 mm | Max. work piece diameter: 550 mm | Z axis: 1150 mm | X axis: 350 mm | Diame...

2002 TSCHUDIN PL 105 A

• Manufacturer: Tschudin

Control: GE FANUC Series 18-T | Centre height: 175 mm | Distance between centres: 1000 mm | Max. grinding diameter: 348 mm | Grinding length: 1000 mm | Workpiece weight on centres max.: 250 kg | Diameter: 500 mm...

Single Unwinder

• Manufacturer: Single Unwinder

Single Unwinder With photocell for paper reading Hydraulic lifting of the paper roll Air-mechanical brake, Re CX250 Paper tension control through dancer roller and brake Immediately available About Single Unwinde...

Single Unwinder,

Single Unwinder, years '90 Single Unwinder. It was installed in a Manzoni flat&satchel bag machine Ideal for paper Immediately available About Single Unwinder, years '90 Location Information Available in region: ...

BLUM TC 50

• Manufacturer: Blum