Used Industrial Furnaces & Ovens in Wallonia, Belgium

Laboratory drying furnace VEB, type 983

As good as new Useful dimensions: Ø 500 mm, depth: 350 mm With 3 shelves Thermostat max. 250°C

Steel scrap feeding device KÜTTNER for furnace

• Manufacturer: Küttner

With 2 vibrating motors UHDE, type SM20/4 On mobile peadestal Center distance: 1330 mm, driven by drum motor BAUER; 1,5 kW; 220/380 V Wth loading shank taper 1500 mm x 2000 mm

Vibrator for furnaces and ladles f. side-lining

220/380 V, 2,6/1,5 A 3 vibration engines BOSCH With cylinder and pneumatic control by hand Opening Ø 1100 mm - 1600 mm

2016 ElectricTreatment furnace for aluminium NABERTHERM with curing pool

• Manufacturer: Nabertherm

Dimensions extérieures: length ± 4000mm, width ± 3600mm, height 6900mm Inner dimensions: length 1800mm, width 1800mm, height 1750mm Useful dimensions: length 1500mm, width 1500mm, height 1350mm Bell furnace with ...

Induction furnace , 500 kg, 1000 Hz, INDUCTOTHERM

• Manufacturer: Inductotherm

Furnace, condenser, hydraulics, switchgear cabinet Cabinet VIP Powertrac, type 300, ENGINE: 300 kW, entrance cabinet 345 KVA, 50 cycles per second of 380 V, 800A, from 1983 This furnace is on a two-carrier crane...

1997 Fixed gas melting furnace for aluminum THERMCO

• Manufacturer: Thermco Systems

Melting area dimensions: Length: 2450mm; Width: 1300mm; Height: ±2200mm With charging skip 2 outlet chutes with with plug system Telemecanique control With CE mark

fixed bale-out crucible furnaces HINDENLANG, 200 kg aluminium

• Manufacturer: Hindenlang

Type SLEP200 Year of construction: 1987, serial numbers: 7164 + 7166 For 71 l = 213 kg alu with control box and cover , max.temp.720 °C celsius melting capacity +- 80-90 kg/h.

1979 Pouring furnace ABB, 15 t, type OCC150

• Manufacturer: ABB

Electric pouring furnace Pouring furnace: SERT, year of construction 1989 (modernised and overhauled in 2005) Hydraulically movable (follows the AMC) With cooling tower

Warm holder furnace, channel inductor ASEA 45/62 t

• Manufacturer: Asea

Composed of: - 1 furnace - 3 inductors - 1 cooling unit with pumps - 1 furnace control system - 1 hydraulic unit - 1 spare hydraulic cylinder

Electrical tiltable furnace MORGAN ±600kg Alu

• Manufacturer: Morgan

External dimensions: Length: 1800 mm; Width: 2400 mm; Height: 1900 mm With control cabinet

Induction furnace RADYNE, 500 kg, 1000 Hz

Type: AMF500/700, serial number: 22455 Year of construction: 1980, weight: ± 4800 kg With VIP Power track, hydraulic unit, heat exchanger and pumps Without high voltage transformer

Induction furnace INDUCTOTHERM 3+5t; 2250kW

• Manufacturer: Inductotherm

With 2 furnace bodies: With power cabinet POWER TRACK VIP 600V With control panel With 1 power isolation transformer With open cooling tower MITA With hydraulic unit With water pumping station and heat exchanger ...

1982 Electric melt-and tilting furnace KOPO, 500 kg, brass

Type: T500, serial number: 147 100 KVA, 80 kW, 380V, 50 Hz For crucible, type TP12 Melting capacity for cold furnace: 5 hours, warm furnace: 4 hours For 500 kg copper With command box and hydraulic unit

2001 Electric treatment furnace PADELTHERM 650°C gas

• Manufacturer: Padelttherm

Heated with natural gas CE mark on the oven Weight: 5100 kg | Electrical voltage: 400V /50Hz/ 107,5A | Control voltage: 230V | Power: 72kW | Max temperature: 650°C

Induction furnace JUNKER 2x 4t

• Manufacturer: Junker

Crucible dimensions: Ø780mm; height: 1475mm Melting and holding warm possible at the same time With 2 loading conveyors With 2 water pump stations With hydraulic unit With control cabinet SIEMENS S5 control With ...