Used Industrial Furnaces & Ovens in Poland

Furnace, blowing and extraction fans

Fans of various parameters, in working order.

Furnace for drying sawdust and wood chips

Viessmann 720 KW oil furnace

Capacity 720 KW Year 1995

Gas furnace (natural gas) 4 MW

TYPE LLR 4000 4 MW furnace Year 1999 Maximum flow temperature 120°C, maximum pressure 6 bar Used very little, only for cleaning the two adjacent biomass furnaces The furnace is in very good condition, as shown in...

Expansion vessel for 3000 l furnace

Diameter 140 cm Total height 260 cm Capacity 3000 l Year 1994

WEN 108 air and smoke furnace fan

Inlet 70 x 100 cm Outlet 70 cm Motor 22 kW

A cell with a screw feeder for feeding fuel to the furnace

Inlet 19 x 10.50 cm Length of auger 3 m Diameter of auger 120 mm Motor driving the auger 025 KW, 1340 rpm Cell motor 0.37/0.42 KW. 1390/1665 rpm

Ash conveyor, waste removal from the Ż 35 furnace

Length 2.90 m, total 3.50 m Screw diameter 190 mm Outer diameter 210 mm Motor with geared motor 0.75 kW

Ash conveyor, waste removal from the Ż 34 furnace

Length: 4.50 m Screw diameter: 180 mm Outer diameter: 210 mm Motor with geared motor: 1.1 kW

Expansion vessel for furnace, buffer, capacity 1000 l

Capacity 1000 l Pressure min/max 0/4 bar Temperature up to 100 degrees Year 2010 - height 220 cm -diameter 90 cm

Emergency cooler for 3.5 MW furnace

A total of 8 fans, with high-performance radiators underneath. Two segments, one segment will cool 1750 kW.

Heating furnaces for plastics

• Manufacturer: Tools Factory

The device consists of a heating oven with single-sided heating from the top . The heaters have the ability to adjust each radiator individually from a touch panel. The device has a built-in PLC that controls the...

Urbas biomass furnace, rated power 5 MW, typed at 3.5 MW

Year 2002 Water temperature: 110 degrees Celsius, pressure: 6 bar Power: 5.0 MW, rated at 3.5 MW due to regulations and the lack of an electrostatic precipitator Delivery: late April – May 2026

Continuous furnace

Pass-through oven (adjustable blowing height, blowing force, belt speed, belt tensioner, two sections, complete set, including fans on chimneys, stainless steel chimneys, possibility of connecting steam, everythi...

Froling 200 KW biomass stove – new lining

Furnace with a heating capacity of 200 kW TYPE Lambdamat FWT 200 Year 1996 Fueled by biomass, bark, wood chips, and sawdust. New lining!!!