Used Filter Presses

Carbon Steel Cartridge And Candle Filter - IPP# 206740

• Manufacturer: Crall Products

cartridge filter MDMT is 0 degrees F at 150 psi Inlet and outlet piping is 3" weld neck flange Filter has swing arm for removing the head. Shell thickness is .250" Head Thickness is .250" Hydro Test to 195 psi. E...

Nutsche Filter Stainless Steel 316 - IPP# 705382

• Manufacturer: Nutsche

Top load/unload design Top half (slurry holder), 300mm deep, open top with (2) removable lids. Bottom half (vacuum/filtrate receiver), 300mm deep Single mesh filter plate between top/bottom sections

ANDRITZ CPF 2.8 METER S6P BELT FILTER PRESS 316L SS WETTED PARTS

• Manufacturer: Andritz

904723.094 Used Andritz CPF 2.8 meter S6P belt filter press all wetted parts are 316L SS with a " hot dipped" galvanized carbon steel frame. Sludge Type: Primary Throughput: 40-50 BDSPTD Feed Consistency: ...

Stainless Steel Austenitic Nutsche Filter - IPP# 107498

• Manufacturer: Seitz-Werke

Stainless type is austenitic but close to 304. 120 Liter tank.

Nutsche Filter Stainless Steel Austenitic - IPP# 217622

• Manufacturer: Wollner & Platz

internal (185liter), jacket (48liter) 316L stainless steel jacket on straight side and bottom dish filter plate with manual raise/lower mechanism, TUV certified

Used JWI/US Filter Model 1000G50-/16/32-20-40SN

• Manufacturer: JWI

Used JWI/US Filter Model 1000G50-/16/32-20-40SN. 40 cu ft Poly plate and frame press. 32 Gasketed Poly plates are 1000 X 1000 mm . Center feed with 4 corner discharge. Has air over hydraulics closing system. Equi...

Stainless Steel 304 Pressure Leaf Filter - IPP# 220169

Cake Discharge: Dry, suitable for direct or pre-coat filtration Number of Filter Screens: 22 445 gallon 20 HP 3/60/230/460 volt Additional Features: Includes a spare filter plate pack.

Stainless Steel 316 Pressure Leaf Filter - IPP# 241128

• Manufacturer: Sparkler

pressure filter

Pressure Leaf Filter Stainless Steel 304 - IPP# 204104

70 ltr pressure filter Centrifugal discharge packing gland on shaft Motor: 220/480 V

Pressure Leaf Filter Stainless Steel 316 - IPP# 220995

Plate pack for a pressure filter Plates stamped # 2229. Seven plates plus a scavenger. With holders and rods.

Cartridge And Candle Filter Stainless Steel Austenitic - IPP# 222986

• Manufacturer: Pall

Pall filter pressure rated 10 bar @ -10/+140 degrees C (7) candles,

Hastelloy - C22 Rosenmund and Cogiem Filter - IPP# 230453

• Manufacturer: Rosenmund

Agitated Pressure Filter The 24.5 Liter vessel is rated -1/6 Bar @ -20 to 200 degree C The 2.7 Liter jacket is rated -1/6 Bar @ -20 to 200 degree C. The .3 Liter Heated Base is rated -1/6 Bar @ -20 to 200 degree ...

Used JWI/US Filter Model 1000G50-/24/30-32-40SN

• Manufacturer: JWI

Used JWI/US Filter Model 1000G50-/24/32-32-40SN. 40 cu ft Poly plate and frame press. 32 Gasketed Poly plates are 1000 X 1000 mm . Center feed with 4 corner discharge. Has air over hydraulics closing system. Equi...

Tower Filter 2.4 m² (26 ft²) Titanium - IPP# 70291

• Manufacturer: International Process Plants

complete modular pilot size tower press system installed in a shipping container for portability The tower press capable of filtering suspension having 10-500 Kg/cu meter (.65-31.5 lbs/cu ft) of solids content. C...

Pressure Leaf Filter Stainless Steel 316 - IPP# 220997

Plate pack for a pressure filter. 3 plates, no scavenger. With holders and rods.