Used Drilling Rigs in Kentucky, USA

GILL BEETLE

DTH Class Drills Holes 4 to 24 in Diameter Able to Drill Holes Vertically, Horizontally, and Every Angle in Between Has a Hydraulic table for up to 9 opening IR-360 DTH Hammer w/ Bits 8.5 and 7.5 IR-350 DTH Hamme...

2020 Sandvik DP1500I

• Manufacturer: Sandvik
• Model: DP1500
• Operating weight: 23,000 kilogram

2,295 total hours & 1,015 percussion hours Cat C13 Tier 4 Diesel Engine Drifter / Rock Drill is a RD1635CF Excellent condition

2008 ATLAS COPCO ECM720

• Manufacturer: Atlas-Copco
• Model: ECM 720
• Horsepower: 384.8733394981728 horsepower
• Drilling depth: 29.5 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2008 INGERSOLL-RAND ECM720

• Manufacturer: Ingersoll Rand
• Model: ECM-720
• Horsepower: 385 horsepower
• Drilling depth: 30 meter

4.5 – 5.5 Inch Class Montabert HC200A Drifter Cat C11 Engine Set up for 60mm drill steel Only 3570 Total Hours

2013 MONTABERT MICRO CPA360

• Manufacturer: Montabert

Montabert Micro CPA Package Bobcat Mini Excavator E60 w/ 600 Hours HB980 Hydraulic Breaker w/ 120 Hours Doosan P185WJD-T4i Portable Air Compressor w/ 84 Hours Hydraulic Clamp, E60 Micro CPA Drilling Attachment Th...

1993 INGERSOLL-RAND DML

• Manufacturer: Ingersoll Rand

4.5 – 5.5 Inch Class CAT 3412 Diesel Engine w/ Only 1,500 Hours Since Rebuild Runs 30ft Drill Steel High Pressure Unit w/ On-Board IR HR2 1050 CFM / 350 PSI New Pump Drive and Double Motor Spur Gear Head

2011 FURUKAWA HCR900ES

• Manufacturer: Furukawa
• Model: HCR900ES
• Horsepower: 225.3 horsepower
• Machine weight: 202 kilogram

2.5 – 3.5 Inch Class HD709 Drifter w/ 1545 Percussion Hours CAT 3126 Diesel engine w/ 3118 Hours Extendable boom Single-Lever Drilling Controls Design Versatility Allows for Drilling either Horizontally or Vertic...

2003 DRILTECH D55SP

• Manufacturer: Driltech

DTH Class 3508 Cat Engine Single Pass Unit Currently using a 8” DTH Hammer with a 9” Bit Equipped w/ ( 2 ) 6 ½” x 25 ft. Drill Pipe w/ 8” DTH Hammer Dust Collector Mast 73’ Long, U/C 85% – Excellent condition. Un...

2024 SOOSAN JD1400E-II

• Manufacturer: Soosan

2023 Year – JD1400EII Rock CommanderHandles a 14’ft lead rod and changes 12’ft thereafter. Carries 86’ft of drill steel onboard. New Features: Operator Comfort – Enlarged operators cabin with movable drill contro...

2005 ATLAS COPCO ROC D7-LM

• Manufacturer: Atlas-Copco
• Model: ROC D7 LM

3.5 – 4.5 Inch Class Long Mast 20′ FT Steel Cat Engine Unit is still in use. 2005 Atlas Copco ROC D7-11 LF These Photos were taken March 29th, 2016 when the unit had 5798 engine hours & 1494 percussion hours. The...

2005 Sandvik Pantera 1500

• Manufacturer: Sandvik

21,163 frame hours 11,015 percussion hoursSet up for T51 Well maintained for age

2024 SOOSAN JD800E-II

• Manufacturer: Soosan

New 2024 Soosan JD800E-II Rock Commander w/ QSB6.7 Series Tier 4 Final Equipped with JET9II Drifter 235 CFM @ 150 PSI Air Package Can be setup for T38, T45, or T51 – Customer Choice Unit starts a 14’ft starter st...

2019 Furukawa HCR1450EDII Stock# 4501

• Manufacturer: Furukawa
• Model: HCR1450EDII
• Horsepower: 260.15828523569866 horsepower
• Machine weight: 16,460 kilogram

Unit has 4,235 total hours Unit will be fully cleaned and freshly serviced. Excellent condition.

2006 Atlas Copco ROC D3

• Manufacturer: Atlas-Copco
• Model: ROC D3

Equipped with COP 1240 Drifter 28 hours on machine since upgrades: New track chains New Ecm motor control New mast roller New cable New nose cone seals New accumulator diaphragms 2 new control switches at control...

1997 Ingersoll Rand ECM590

• Manufacturer: Ingersoll Rand
• Model: ECM-590

– Equipped with YH80A Drifter – Ready to work – Repairs needed are one door with broken hinges – Fuel stop solenoid – This machine has a new air end and has less than 200 hours on hydraulic pump

Ingersoll Rand ECM-720 Drilling Rig

• Manufacturer: Ingersoll Rand
• Model: ECM-720

Good condition Ingersoll Rand ECM-720 Drilling Rigs manufactured in 2003. Located in USA and other countries. Click request price for more information.