Used Bending & Forming

MODEL 158 1 1/2" ABBEY ETNA ROTARY SWAGER 13045C

• Manufacturer: Abbey Etna
• Model: 158

MODEL: 158 SERIAL #: 1694 1-1/2" TUBE CAPACITY 3/4" SOLID CAPACITY 8" DIE LENGTH 2-1/2" WIDTH OF DIE 1-5/8" THICKNESS OF DIE 16 ROLLS 1-31/32" DIAMETER OF ROLLS 1-3/4" DIAMETER OF HOLE THROUGH SPINDLE 36" CENTER ...

24 Stand x 3" Shaft Tishken Roll Former Z21010D

• Manufacturer: Tishken

Auto Lube System 1986 2 Separate Bases Spindle diameter: 3 inches | Number of stands: 24 | Power: 40 horsepower | Horizontal centers: 14" | Vertical centers: 13.5 "-14.25" With 1" of Verticaladjustment | Base to ...

11 Stand Tru - Tech Roll Former Z21010L

SMW FRequency Drive Missing One Outbord Support Spindle diameter: 2 inches | Number of stands: 11 | Power: 50 horsepower | Horizontal centers: 10" | Vertical centers: 1.5 | Base to bottom of spindle: 7.5 | Roll s...

PINES 1-1/4 #0641723

• Manufacturer: Pines
• Model: 1-14

Round tubing(non ferrous): 2.5" X 109" | Round tubing(mild steel): 2.5" X .065" | Shcedule 80: 1.5" | Maximum bending radius: 12" | Maximum bend angle: 200 DEGREES | Maximum tube length over mandrel: 89" | Bendi...

LUBOW DWB-2 #0308822

• Manufacturer: Lubow

Air pneumatic: YES | Max width of part: 36" | Cylinder stroke: 10" | Bend degree: 90" | Tooling: 5/16"

1966 BROOKES #21491 Hydraulic Press Type Tube Bender #0100617

• Manufacturer: BROOKES

SPECIFICATIONS: BROOKES #21491 Hydraulic Press Type Tube Bender SPECIFICATIONS:Stroke: 10""Main Cylinder Rod Diameter: 3.380""EQUIPPED Position)Motor: 25 HP, 400/440/3/50 - 1450 RPMOVERALL DIMENSIONS: 9' x

1"x .065" Pines #5T Tube Bender #0105017

• Manufacturer: Pines

SPECIFICATIONS: Material: Round Tubing: Non-Ferrous, 25,000 psi (two): 1″ x .072″ (25.4 mm x 1.82 mm) Square Tube: Mild Steel (two): 7/8" x .035" (22.2 mm x .889 mm) Round Bar: Mild Steel (two): 5/8" (15.8 mm) Sq...

Roper Whitney NO. 392 MANUAL ROLL BENDING MACHINE

• Manufacturer: Roper Whitney

Call for Status and Pricing The No. 392 manual roll has 2 1/2″ precision turned and ground high carbon steel rollers. There are four wiring grooves 1/4″, 9/32″, 5/16″ and 3/8″. All rolls are standard with fully e...

Roper Whitney NO. 418 MANUAL ROLL BENDING MACHINE

• Manufacturer: Roper Whitney

Call for Status and Pricing The No. 418 manual roll has 3″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/8″, 1/2″ and 5/8″. All rolls are standard with fully enclosed gea...

Roper Whitney NO. 383 MANUAL ROLL BENDING MACHINE

• Manufacturer: Roper Whitney

Call for Status and Pricing The No. 383 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed g...

Roper Whitney NO. 0381 MANUAL ROLL BENDING MACHINE

• Manufacturer: Roper Whitney

Call for Status and Pricing The No. 0381 manual roll has 2″ precision turned and ground high carbon steel rollers. There are three wiring grooves 3/16″, 1/4″ and 5/16″. All rolls are standard with fully enclosed ...

18 Stand x 1-1/2" x 40" Bradbury Dual Head Rollforming Line #2100918

• Manufacturer: Bradbury

SPECIFICATIONS: Rowe Uncoiler ..Model Number..........................................16040-DSJ ..Serial Number.........................................29204 ..Maximum coil weight....................................

8/12 STAND X 2.5" X 9" RAFTER ROLLFORMER. #0775625

• Manufacturer: RAFTER

AMERICAN TRIM ROLLFORMER. #0666425

• Manufacturer: American

12 STAND X 2" X 20" PM ROLLFORMER. #0900324

• Manufacturer: P.M.

: SERVOMATIC IV PRESS FEED UNIT : PARTS CHUTE : UNCOILER : CUT-OFF PRESS : GAP-FRAME PRESS