Used Ball Mills

Ball mill grinding media

Ball mill grinding media 3” to 5” Sold by the ton Price including freight is available Ball mills and other minning equipment available

44" diameter x 3' long ball mill

44" diameter x 3' long ball mill IPR metal base Used, no service PCP

Mill, Ball, 8' X 6', Marcy, 250 HP, #S484980

• Manufacturer: Marcy

Marcy 8' diameter x 6' long ball mill with trunnion feed and discharge. Rubber liners and lifters. Last used in a wet grind application. Previously driven by 250 HP motor thru gear & pinion. Gears good. Lots of w...

Mill, Ball, Batch, 4' X 5', Fiedler, Porcelain, #Z485823

• Manufacturer: Fiedler

Fiedler pebble mill 48" diameter x 60" long (interior dimensions), with running & discharge door, Unit less V-belt to pinion & bull gear drive (less motor), Mounted on stand. Outside dimensions - 11' long x 5' wi...

Mill, Ball, Batch, 3'6" x 4'6", Porcelain, Pebble #S744317

Ceramic lined 40" diameter x 54" long pebble mill, 52-gallon, porcelain-lined. Driven by approximately 20 HP, 460/230 Volt, 3/60 Hz motor thru v-belt assemblies on motor sheave and drum sheave with belts turning ...

Mill, Ball, 9'6" X 14', Dominion, 500 HP, #D741926

• Manufacturer: Dominion

Dominion 9'6" diameter X 14' long Grinding Mill with 500 HP, 2300 Volt, 3/60Hz Synchronous motor. Shell measures 1-1/4" thick. Includes 24" diameter Wichita Pneumatic Air Clutch and 40" diameter X 24" wide self-a...

Mill, Ball, 11' x 14.5', Dominion, No motor #D740103

• Manufacturer: Dominion

Dominion 11' x 14.5' Ball Mill. Includes the mill shell, bull gear, trunnion, feed liner, pinion, bearings, and gear covers but no motor.

Mill, Ball, 2'6" x 4'6", Denver, 10 HP, Steel Liners #S744260

• Manufacturer: Denver

Denver 30" Diameter x 54" long Ball Mill with steel liners and ball charge. Incudes 16" x 12" infeed hopper at 57" feed height and 17" diameter overflow discharge. Mill is driven by 10 HP, 1175 RPM, 460 V, 3-phas...

Mill, Ball, Batch, 3' x 32", Paul O Abbe, 5 HP, C/st #S738884

• Manufacturer: Paul O. Abbe

Paul O'Abbe ball mill, 32" diameter x 36" long (inner measurements) mounted on stand. Unit is carbon steel contacts, jacketed for water cooling. Unit has 9-1/2" x 8" door. Unit has 9-1/2" x 8" door. Includes 5 HP...

Mill, Ball, 21.75' x 43', ANI, 10,000 KW, Double Pinion, #D740108

• Manufacturer: ANI Mineral Processing

Unused ANI Mineral Processing Ball Mill, 21.75' x 43', double pinion drive includes (2) 5,000 KW motors. Manufactured in 2001. Wet overflow discharge type. Designed to grind material at a dry rate of 325 MTPH. In...

Mill, Ball, Rod, 13' x 18'8", Nordberg-Mesto, 1500 HP Motor #5991238

• Manufacturer: Symons - Nordberg

Nordberg 13' x 18'8" (4m x 5.7m) rod/ball mill, originally manufactured in 1969 and refurbished in 2016. Serial Number GM 438, it features a single-piece shell, feed and discharge-end trunnions, and liners. The m...

Mill, Ball, 8" X 50", Vibratory, Palla, Mdl 20U, #L741301

• Manufacturer: Palla

Humbolt-Wedag Palla Vibratory Ball Mill, Model 20U - Measures 8" in diameter x 50" long. Mounted on a stand. Was a demonstration unit for trade shows (no motor included). Serial number 20181.

Mill, Ball, Batch, 3'9" X 4', Paul O Abbe, No Motor, #D739650

• Manufacturer: Paul O. Abbe

Paul O. Abbe Model 4A pebble/paint mill, 3' 9" (1.14 m) x 4' (1.22 m), ceramic lined, batch type mill. Total mill volume: 251 gallons. Mill speed: 27 RPM when 50% full of pebbles or porcelain balls, missing hatch...

roller mills with whizzers and fans ,Williams mill

• Manufacturer: Williams

Williams Pulverizer Roller mills with Whizzer separators & 400HP fans Used Industrial Roller mills simultaneous grinding & drying Mills have been dismantled and are stored in our yard. 3 Williams roller mills 3 M...

Mill, Rod, 9.5' X 13', Marcy, #D734871

• Manufacturer: Marcy

Rod mill, 9.5' diameter x 12' long, manufactured by Marcy, formerly driven by 600 HP motor and gear reducer (less drive assembly). Formerly used steel liners. Includes Herringbone gear 332 teeth, 19 teeth pinion ...