Used automated in Saxony, Germany

STAR rail guide table with drive

Rail guide table, linear unit with drive, limit switch and encoder STAR (REXROTH) 1460-305-00 ID no. 69548 spindle: Ø 24 mm, pitch: 4 mm Gear ratio toothed belt drive: 1 : 1 Motor: SIEMENS 1FT5046-1AF71-3EB0 3000...

REXROTH linear guide carriage with rail

• Manufacturer: Bosch - Rexroth

Linear guide carriage, 2 pieces with linear guide rail REXROTH 2x R167131410 2x linear guide carriage: Length: 142 mm, width: 162 mm, height: 42 mm Hole spacing: 72.5 / 80 mm, 6x threaded hole: M12 x 1.75, depth:...

PAGUS hydraulic braking device

• Manufacturer: Pagus

Braking device, hydraulic PAGUS Ø 45 x 340 mm Rod: Diameter: Ø 45 mm, total length: 340 mm Rod bore: diameter: Ø 20 mm, depth: 20 mm Rod threaded hole: M8 x 1.25, depth: 18 mm Housing: Diameter: Ø 85 mm, length: ...

PAGUS hydraulic braking device

• Manufacturer: Pagus

Braking device, hydraulic PAGUS Ø 45 x 380 mm Rod: Diameter: Ø 45 mm, total length: 380 mm Rod bore: diameter: Ø 20 mm, depth: 20 mm Rod threaded hole: M8 x 1.25, depth: 18 mm Housing: Diameter: Ø 85 mm, length: ...

NSK linear guide carriage with rail

• Manufacturer: NSK

Linear guide carriage, 2 pieces with linear guide rail NSK JAPAN TS15 2x linear guide carriage: Length: 73 mm, width: 34 mm, height: 25 mm Hole spacing: 26 mm, 4x threaded hole: M4 x 0.7, depth: 5 mm Linear guide...

LINMOT linear motor with slider

Linear motor with slider LINMOT PS01-23x80-R Stator with IP67 plug M17/9(m) used, tested !

STAR linear guide carriage

Linear guide carriage, 2 pieces, with linear guide rail, linear unit STAR 1604-594-10 Linear guide rail: Cross section: 53 / 46 x 48 mm mm Article consists of two linear guide carriages and one linear guide rail ...

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator, MEHAG approx. 0.5 m connection cable with plug used, tested !

PB PORTER telescopic guide

Telescopic guide PB PORTER E.160 Rod diameter 1: Ø 25 mm, flattening: 22 mm Rod diameter 2: Ø 35 mm, flattening: 32 mm Head diameter: Ø 48 mm, height: 22 mm Thread: M45 x 1.5, length: 110 mm New !

NSK ball screw with nut

• Manufacturer: NSK

Ball screw with nut, ball screw drive NSK W4013-135D-C2Z 98L6-0035 Thread: Ø 40 mm Shaft piece: Ø 28 mm, length: 70 mm Thread: M30 x 1.5, length: 27 mm Bearing seat1: Ø 30 mm, length: 32 mm Bearing seat2: Ø 30 mm...

REXROTH positioning unit

• Manufacturer: Bosch - Rexroth

Positioning unit REXROTH PE 2/XP BG1 3842242350 Pneumatic cylinder: 0 822 241 137 max. 10 bar used, tested !

MEHAG vibratory feeder

Vibratory feeder, sorting vibrator MEHAG Zella-Mehlis Vibrator 6,3 L 220 V 1 AC 50 Hz 120 VA approx. 0.6 m connection cable As good as new ! (never been in use)

ROEMHELD lever clamp

Lever clamp ROEMHELD , HILMA, STARK 1825111 913886 S36 Flange: 55 x 55 mm, hole spacing: 42.5 mm Insert cylinder: Ø 30 mm, length: 31 mm New !

GENUS TECH® pneumatic clamps

Pneumatic clamps GENUS TECH® 110MPNI433 New ! 2x square: 20 x 20 x 10 mm | Mounting bracket: 80 x 54 / 74 x 16 mm | Hole distance: 62 mm | 2x drilling: 14,1 mm | Dimensions: 271 x 144 x 62 mm

REXROTH ball screw spindle

• Manufacturer: Bosch - Rexroth

Ball screw with nut, ball screw drive REXROTH 32x10Rx3,969 R15103F541 Thread: Ø 32 mm Thread: M20 x 1.0, length: 22 mm Shaft piece: Ø 20 mm, length: 25 mm Shaft section: Ø 20 mm, length: 18 mm Shaft end: Ø 18 mm,...