Used Processing in Washington, USA

VINCENT MODEL EF-30 SLUDGE PRESS S/S SN 17590-8 MANUFACTURED 2019

• Manufacturer: VINCENT

One (1) Used Vincent Mdl. EF-30 Sludge Press All S/S SN 17590-8 MFG 2019 EF-30 Sludge Press HP: 30 CAPACITY GPM: 300-1500 STAINLESS STEEL UNIT MANUFACTURED 2019 Presently installed in operation. Available due to ...

HOWDEN SERIES TWIN-CA 56 STEAM TURBINE AND TD POWER SYSTEMS AC GENERATOR 7.0MW MFG 2018 - PENDING RF

• Manufacturer: Howden
• Model: TWIN-CA 56

Howden 7MW TWIN Condensing Steam Turbine with A.C. Generator MFG 2018 50 HZ / 60 HZ • OEM: Siemens Turbomachinery Equipment / TD Power systems Series SST-110 • Unit type: Twin-CA 56 • Power output: 7.0MW • Main S...

ROYAL A-20-F

• Manufacturer: Royal

ROYAL A-20-F CRUCIBLE HAULER ROYAL A-20-F Crucible Hauler, 30,000 lbs Capacity, 19160 Hours

2015 ROYAL A-20 HAUL MASTER

• Manufacturer: Royal

Royal A-20 Haul Master Crucible Hauler 2015 Royal A-20 Haul Master Crucible Hauler, 30,000 lb Capacity, Cummins 6-Cylinder Diesel Engine EQUIPPED WITH: Cummins 6-Cylinder Diesel Engine

2007 Coperion Extruder, Model# ZSK-26

• Manufacturer: Coperion Waeschle

Coperion Extruder with Refrigeration Unit and Spare Set of Augers, Model# ZSK-26, Serial# 919603

6,000 Gallon Tanks

Tanks would need to be cleaned prior to use. NOT FOR POTABLE WATER USE. condition: good model name / number: 6000 gallon each size / dimensions: 10 x 10 C392021-M665 .

155" (3.94M) WET END SECTION CORRUGATED MEDIUM ESCHER WYSS STEP-DIFFUSER HEADBOX BLACK CLAWSON C-FORMER SS TABLE

• Manufacturer: Black Clawson

103902 One (1) used wet end section, 155" (3.9m) wide. Trim width 136" (3.4m), 1600 FPM, produced corrugated medium, consisting of Escher Wyss 155" (3.9m) step diffuser headbox (s/n x -1119), Black Clawson C-Form...

115" (2.92M) VALLEY S/S PRESSURIZED HEADBOX

• Manufacturer: Valley

104013 One (1) used Valley 115" (2.92m) slice stainless steel pressurized headbox. With (2) rectifier rolls. S/N 1772R. BasisWeightRange 56-162; BC3; FlowRate 10755/11070; FPM 1550; Material SS; PaperType Fine; W...

180" (4.57M) BELOIT S/S AIR PADDED HEADBOX

• Manufacturer: Beloit

101744 One (1) used Beloit 180" (4.57m) , 1800 FPM, stainless steel headbox. Built in 1970. Air padded with skimmers. Beloit design. Micro adjustment for fine paper. Two rectifier rolls, 16" and 12" diameter. 2-R...

135" (3.42M) ESCHER WYSS S/S PRESSURIZED HEADBOX

• Manufacturer: ESCHER WYSS

101663 One (1) used Escher Wyss Headbox with pressure equalizing chamber. Stainless steel. 135" (3.42m) Slice. Micro slice adjusters. FPM: 2,200. Paper type: Fine - Tissue. Built 1984. Designed flow rate 10,300 U...

CELLECO MODEL 350 CLEANPAC 5" DIA. BANK of 32 SECONDARY

• Manufacturer: CELLECO

107688 One (1) used Bank of (32) Celleco, Model 350 CleanPac low consistency cleaners, Secondary, 5" diameter x 30" long, material: plastic

FINCKH MDL. HICO SIZE 3 PRESSURE SCREEN S/S

• Manufacturer: FINCKH

107694 One (1) used Finckh Model HICO Size 3 stainless steel pressure , horizontal, with slotted screen basket, .008" slots, N20617-1, 10141924 , 12" openings on top. Belt driven , no motor. Made in Canada.

BIRD MDL CN 70 PRESSURE SCREEN, S/S, 100 PSI .018" (.46MM) SLOT

• Manufacturer: Bird

106019 One (1) used Bird Model 70 vertical stainless steel Centriscreen, belt driven by a 200 HP motor. Reported to have a .018" (.46mm) slotted screen basket. Capacity approximately 3800 gpm depending on the par...

Goff 1244 Spinner Hanger

• Manufacturer: Goff
• Model: 1244

Goff Spinner Hanger Shot Blasting Machine, Year 2011, Model 3672-D, with Dust Collector (if desired). Previous owner reported that it was taken out of operation in working condition. Have cleaned out media. Seve...