Used Processing in Colorado, USA

Trusted Seller
Worthington 4x9 Reciprocating Compressor
- Manufacturer: Worthington
Gas compressor rated at 1250psi, comes with Waukesha F-817 serial number 318107
Center, CO
Trusted Seller
Atlas Copco ZT3M Screw Compressor
- Manufacturer: Atlas-Copco
- Model: ZT 3
Used compressor, powered with 3208 Caterpillar, complete unit - 3208 serial# 9WCO2517. 7.5 bar/110 psi. 360 l/s (762 cfm) free air delivery @ 3000 rpm. Parts list in e-file Weight: 7200lbs Dimensions: 130"L x 62"...
Center, CO
Trusted Seller
Gardner Denver RLC 1 Reciprocating Compressor
- Manufacturer: Gardner Denver
Used single stage compressor with 1200psi vessel, cooling fan, Waukesha 145-GK, on skid, power end cast # RLC1, cylinder cast # 13RXD2, 62565. Cylinder size 4.5"
Center, CO
Trusted Seller
Lube Systems Inc. NFP-1-1-150-2-SS4
- Manufacturer: Lube Systems Inc.
Used large lube skid, has Plenty Products Inc. model-NFP-1-1-150-2-SS4, Basco heat exchanger, and Siemens 15hp electric motor
Center, CO
Trusted Seller
Lube Systems Inc. NFP-1-1-150-2-SS4
- Manufacturer: Lube Systems Inc.
Used large lube skid, has two Plenty Products Inc. model-NFP-1-1-150-2-SS4 good to 150mawp @ 200F, Basco heat exchanger, and Siemens 15hp electric motor
Center, CO
Trusted Seller
Lube Skid TYPE 500
- Manufacturer: Lube Skid
Heat transfer unit, part number 1503-05-036-038, size 05036, shell maximum working pressure 300psi, tube maximum working pressure 150psi, maximum temperature for shell and tube is 300 degrees fahrenheit.
Center, CO
Trusted Seller
Lube Skid TYPE 500
- Manufacturer: Lube Skid
Heat transfer unit, part number 1503-05-036-038, size 05036, shell maximum working pressure 300psi, tube maximum working pressure 150psi, maximum temperature for shell and tube is 300 degrees fahrenheit.
Center, CO
Trusted Seller
Power Zone Reclaimer 100
- Manufacturer: power zone equipment
Used 75 HP Mud Tank/Slurry Mixing Tank Hp: 75
Center, CO
Trusted Seller
Water heater -
- Manufacturer: Water Heater
Used, 210 degree 60GPM water heater, built by Hotsy, was with Detroit 3-53 serial number 03DB001182 Model 5033-5201 Stock #53855, FMC Bean pump belt drive gen
Center, CO
Trusted Seller
Pall Air Dryer T400DEA4-000BSN
- Manufacturer: Pall
Used 400 CFM @ 100PSI Rating. Year 1985, 150 PSIG Design Pressure, Temp. 90 F. with controls on feet. 460 Volts, 3 phase, Pall DEA Energy Tower Heat Activated, 460 V, 30 System Den Press 60 PSI @ 90*F, Bottles ar...
Center, CO
Trusted Seller
Tecogen - Screw Compressor
- Manufacturer: Tecogen
Used screw compressor, along with a Cotta gear increaser, was mounted on the front of Caterpillar D-399, built Aug 1987
Center, CO
Trusted Seller
Hallscrew HSO 2035 Screw Compressor
- Manufacturer: Hallscrew
Used Hallscrew compressor Volts: 115/120 | Ratio: 1.8500
Center, CO
Trusted Seller
Airmac QDD-25W Reciprocating Compressor
- Manufacturer: Airmac
Used upright air compressor on skid with electric motor mount and bottom half of belt guard and cracked heat exchanger
Center, CO
Trusted Seller
Abex Denison T6D 031 3R00 A1 Hydraulic Unit
- Manufacturer: Denison
Used hydraulic skid with Abex Denison T6D 031 3R00 A1 vane pump good for 5.68 cubic inches per rev, or 44 GPM @ 3,000 PSI continuous at 1800 RPM, has SAE #2 or 3 housing connections, tank, cooling fan, had 100 HP...
Center, CO
Trusted Seller
Hagglunds Denison T6C 017 1R00 B1 Hydraulic Unit
- Manufacturer: Hägglunds
Used hydraulic skid with Abex Denison T6C 017 1R00 B1 vane pump good for 3.56 cubic inches per rev, or 27 GPM @ 3,000 PSI continuous at 1800 RPM, has SAE #3 housing connections, tank, cooling fan, had 100 HP Wauk...
Center, CO
Atlas-Copco ZT 3 Industrial Compressor
- Manufacturer: Atlas-Copco
- Model: ZT 3
Good condition Atlas-Copco ZT 3 Industrial Compressors. Located in USA and other countries. Click request price for more information.
USA