Used Extruders in Michigan, USA

1971 GLOUCESTER 233-001

• Manufacturer: GLOUCESTER

Ground Level, 1971 Gloucester Model:233-001 3.5" Water Cooled Extruder with Control Cabinet S/N:233-15237-01. Located in Alsip, IL.

Welex Jumbo Spindle Sheet Winder Feeder with Stand Alone Holder, 480V 3PH - USED

• Manufacturer: Welex

USED Unit has been powered up working. Safety sensors are working. Welex Jumbo Spindle Sheet Winder Feeder with Stand Alone Holder, 480V 3PH Specs: 37" Dia Spool Area ( Center or bar to bottom of Stand) 54" Lengt...

Extruders 80675

with adapter Photos available.

Extruders 80467

- 100 HP, 500 V DC motor into belt driven gearbox - Gearbox ratio: 11.48:1 - Electrically heated, water cooled, vented and plugged barrel - 65" Centerline - Gearbox rated for 265 HP @ 1750 RPM - Beringer 3.5" Sc...

Extruders 17227C

Air cooled

Extruders 80676

3" OD Sheet Die Hole, 1.5" OD Die Hole Size Photos available.

Extruders 80464

- Electrically heated, air cooled, vented & plugged barrel - 42.5" Centerline - Free standing 8 Zone Control Panel - Reliance VS DC Drive Unit - 75 HP DC Motor into belt driven gearbox Photos available.

Extruders 80834

- Electrically heated - Air cooled 4 Zone non-vented barrel - Water feed throat w/hopper - 40 HP, 500 volt, 1725/2100 RPM motor. - Unit includes electrical panel. Photos available.

Extruders 80466

- Water cooled, 7 Zone vented & plugged barrel - Approx. 100-150 HP DC Motor - Belt driven 15.12:1 Gearbox with a 1.25 service factor and a max. 150 HP motor rating - Beringer Hydraulic Screen Changer-no power pa...

1987 Extruders 80465

- 7 Zone Electrically heated, water cooled (closed loop) and side vented barrel - 52" Centerline height - Gearbox ratio; 5.67:1 rated at 158 HP at a service factor of 1.25. - Gearbox belt driven by a 200 HP, 500...

Miyazaki Kneader Vacuum Extruder

MODEL FM-30-3 Detroit Process Machinery offers one used Miyazaki Iron Works Kneading and Vacuum Extrusion Machine Model FM-30-3, Serial Number 4646, Inventory Number DPM-2529. This unit was built new in 2005 and ...

Wahlco Laboratory Piston Extruder

Laboratory Piston Extruder Wahlco 15 ton Piston Extruder, tilting ram, for extrusion of ceramics, carbides, teflons, powdered metal, carbon, etc. includes controls and vacuum pump, Model 21-2.625-15, 2.6″ diamete...

AMK Ross Sigma Mixer Extruder Mixtruder

• Manufacturer: Ross

MODEL KNE-160L Mixer Extruder Mixtruder Detroit Process Machinery offers one used AMK Ross Model KNE-160L Sigma Blade Mixer Extruder Mixtruder, Serial Number 46560 Inventory Number DPM-2507. This unit features 16...